Share Email Print

Proceedings Paper

Dynamic characteristics and testing techniques of microstructures under high load
Author(s): Xiaodong Wang; Tao Wang; Liding Wang; Dong Yin; Nan Li
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

To study the dynamic characteristics of micro inertial components under high load, dynamical equation including the effect of dead load (constant acceleration) is discussed based on Hamilton's principle. The effects of acceleration on the natural frequency of a typical micro inertial component, i.e. the beam-proof mass structure, are analyzed with finite element method. The natural frequency of microstructure was calculated with different high g-force accelerations and beam length. The results show the natural frequency of microstructure gets higher as the inertial force increases because the structural stiffness is strengthened by the load-induced stiffness. A dynamic testing experimental instrument was developed, and experiment was carried out with the instrument. The instrument can generate high g-force environment, impose impact on microstructure and measure the corresponding response. The experimental results show that the resonant frequency of microstructure gets higher as the environmental acceleration increases, and that is consistent with theoretical analysis. The study has practical value for design and fabrication of high g-force micro-inertial components.

Paper Details

Date Published: 13 October 2006
PDF: 6 pages
Proc. SPIE 6280, Third International Symposium on Precision Mechanical Measurements, 62803L (13 October 2006); doi: 10.1117/12.716316
Show Author Affiliations
Xiaodong Wang, Dalian Univ. of Technology (China)
Tao Wang, Dalian Univ. of Technology (China)
Liding Wang, Dalian Univ. of Technology (China)
Dong Yin, Dalian Univ. of Technology (China)
Nan Li, Dalian Univ. of Technology (China)

Published in SPIE Proceedings Vol. 6280:
Third International Symposium on Precision Mechanical Measurements
Kuang-Chao Fan; Wei Gao; Xiaofen Yu; Wenhao Huang; Penghao Hu, Editor(s)

© SPIE. Terms of Use
Back to Top