Share Email Print
cover

Proceedings Paper

Research of eliminating temperature interference in stress measurement by fiber Bragg grating
Author(s): Yutian Wang; Lifang Cao; Qinghua Wang; Xuecai Liu
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In this paper, a set of experimental equipment is outlined which is designed to eliminate temperature change influence in stress measurement. A Fiber Bragg Grating (FBG) is fixed to a specially-structured cantilever, then the load brought to beat at the free end of cantilever. As the load exerted to the cantilever is changed, the stress of FBG changes. From the experiment, we can see that at the beginning of distortion caused by the load, the center wavelength of fiber grating changes, but the chirp effect is not obvious. As the load increases, the spectrum of reflecting peak becomes wider, and the chirp effect becomes more obvious, then two reflecting peaks appear, and the distance of two center wavelengths increases as linearity. When weights are added to 200g, two center wavelengths are 1548.25nm and 1548.43nm and the distance of them is 0.18nm. Experimental results indicate that the distance of two reflect peaks changes in linear relationship with the increasing of load on the free end of the cantilever, and the linearity is up to 0.96. Using this way to package FBG, the cross-sensitivity of stress and temperature can be conquered, and the error caused by temperature change in stress measurement can be eliminated. Therefore, the stress measurement can be realized by one fiber grating.

Paper Details

Date Published: 13 October 2006
PDF: 8 pages
Proc. SPIE 6280, Third International Symposium on Precision Mechanical Measurements, 628009 (13 October 2006); doi: 10.1117/12.715264
Show Author Affiliations
Yutian Wang, Yanshan Univ. (China)
Lifang Cao, Yanshan Univ. (China)
Qinghua Wang, Yanshan Univ. (China)
Xuecai Liu, Yanshan Univ. (China)


Published in SPIE Proceedings Vol. 6280:
Third International Symposium on Precision Mechanical Measurements
Kuang-Chao Fan; Wei Gao; Xiaofen Yu; Wenhao Huang; Penghao Hu, Editor(s)

© SPIE. Terms of Use
Back to Top