Share Email Print

Proceedings Paper

A combined NDE/FEA approach to evaluate the structural response of a metal foam
Author(s): Louis J. Ghosn; Ali Abdul-Aziz; Sai V. Raj; Richard W. Rauser
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Metal foams are expected to find use in structural applications where weight is of particular concern, such as space vehicles, rotorcraft blades, car bodies or portable electronic devices. The obvious structural application of metal foam is for light weight sandwich panels, made up of thin solid face sheets and a metallic foam core. The stiffness of the sandwich structure is increased by separating the two face sheets by a light weight metal foam core. The resulting high-stiffness structure is lighter than that constructed only out of the solid metal material. Since the face sheets carry the applied in-plane and bending loads, the sandwich architecture is a viable engineering concept. However, the metal foam core must resist transverse shear loads and compressive loads while remaining integral with the face sheets. Challenges relating to the fabrication and testing of these metal foam panels remain due to some mechanical properties falling short of their theoretical potential. Theoretical mechanical properties are based on an idealized foam microstructure and assumed cell geometry. But the actual testing is performed on as fabricated foam microstructure. Hence in this study, a detailed three dimensional foam structure is generated using series of 2D Computer Tomography (CT) scans. The series of the 2D images are assembled to construct a high precision solid model capturing all the fine details within the metal foam as detected by the CT scanning technique. Moreover, a finite element analysis is then performed on as fabricated metal foam microstructures, to calculate the foam mechanical properties with the idealized theory. The metal foam material is an aerospace grade precipitation hardened 17-4 PH stainless steel with high strength and high toughness. Tensile and compressive mechanical properties are deduced from the FEA model and compared with the theoretical values for three different foam densities. The combined NDE/FEA provided insight in the variability of the mechanical properties compared to idealized theory.

Paper Details

Date Published: 26 April 2007
PDF: 9 pages
Proc. SPIE 6526, Behavior and Mechanics of Multifunctional and Composite Materials 2007, 65262U (26 April 2007); doi: 10.1117/12.715215
Show Author Affiliations
Louis J. Ghosn, Ohio Aerospace Institute (United States)
NASA Glenn Research Ctr. (United States)
Ali Abdul-Aziz, Cleveland State Univ. (United States)
NASA Glenn Research Ctr. (United States)
Sai V. Raj, NASA Glenn Research Ctr. (United States)
Richard W. Rauser, Univ. of Toledo (United States)
NASA Glenn Research Ctr. (United States)

Published in SPIE Proceedings Vol. 6526:
Behavior and Mechanics of Multifunctional and Composite Materials 2007
Marcelo J. Dapino, Editor(s)

© SPIE. Terms of Use
Back to Top