Share Email Print
cover

Proceedings Paper

Single crystal critical dimension reference materials (SCCDRM): process optimization for the next generation of standards
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Critical dimension atomic force microscopes (CD-AFMs) are rapidly gaining acceptance in semiconductor manufacturing metrology. These instruments offer non-destructive three dimensional imaging of structures and can provide a valuable complement to critical dimension scanning electron microscope (CD-SEM) and optical metrology. Accurate CD-AFM metrology, however, is critically dependent upon calibration of the tip width. In response to this need, NIST has developed prototype single crystal critical dimension reference materials (SCCDRMs). In 2004, a new generation of SCCDRMs was released to the Member Companies of SEMATECH - a result of the fruitful partnership between several organizations. These specimens, which are fabricated using a lattice-plane-selective etch on (110) silicon, exhibit near vertical sidewalls and high uniformity and can be used to calibrate CD-AFM tip width to a standard uncertainty of about ± 1 nm. Following the 2004 release, NIST began work on the "next generation" of SCCDRM standards. A major goal of this thrust was to improve upon the SCCDRM characteristics that impact user-friendliness: the linewidth uniformity and cleanliness. Toward this end, an experiment was designed to further optimize the process conditions. The first round of this experiment was recently completed, and the results show great promise for further improvement of the SCCDRM manufacturing process. Among other observations, we found that the minimum linewidth and linewidth uniformity were primarily sensitive to different factors - and can thus be independently tuned to meet our future goals - which include linewidths as small as 20 nm and a standard uncertainty due to non-uniformity at the ± 0.5 nm level. Our future work will include a new refining experiment to further optimize the important factors that we have identified, and extension of the methodology to a monolithic 200 mm implementation.

Paper Details

Date Published: 5 April 2007
PDF: 11 pages
Proc. SPIE 6518, Metrology, Inspection, and Process Control for Microlithography XXI, 651815 (5 April 2007); doi: 10.1117/12.713289
Show Author Affiliations
Ronald G. Dixson, National Institute of Standards and Technology (United States)
William F. Guthrie, National Institute of Standards and Technology (United States)
Michael Cresswell, National Institute of Standards and Technology (United States)
Richard A. Allen, National Institute of Standards and Technology (United States)
Ndubuisi G. Orji, National Institute of Standards and Technology (United States)


Published in SPIE Proceedings Vol. 6518:
Metrology, Inspection, and Process Control for Microlithography XXI
Chas N. Archie, Editor(s)

© SPIE. Terms of Use
Back to Top