Share Email Print
cover

Proceedings Paper

45nm design rule in-die overlay metrology on immersion lithography processes
Author(s): Yu-Hao Shih; George KC Huang; Chun-Chi Yu; Mike Adel; Chin-Chou Kevin Huang; Pavel Izikson; Elyakim Kassel; Sameer Mathur; Chien-Jen Huang; David Tien; Yosef Avrahamov
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Layer to layer alignment in optical lithography is controlled by feedback of scanner correctibles provided by analysis of in-line overlay metrology data from product wafers. There is mounting evidence that the "high order" field dependence, i.e. the components which contribute to residuals in a linear model of the overlay across the scanner field will likely need to be measured in production scenarios at the 45 and 32 nm half pitch nodes. This is in particular true in immersion lithography where thermal issues are likely to impact intrafield overlay and double pitch patterning scenarios where the high order reticle feature placement error contribution to the in-die overlay is doubled. Production monitoring of in-field overlay must be achieved without compromise of metrology performance in order to enable sample plans with viable cost of ownership models. In this publication we will show new results of in-die metrology, which indicate that metrology performance comparable with standard scribeline metrology required for the 45 nm node is achievable with significantly reduced target size. Results from dry versus immersion on poly to active 45 nm design rule immersion lithography process layers indicate that a significant reduction in model residuals can be achieved when HO intrafield overlay models are enabled.

Paper Details

Date Published: 5 April 2007
PDF: 8 pages
Proc. SPIE 6518, Metrology, Inspection, and Process Control for Microlithography XXI, 651831 (5 April 2007); doi: 10.1117/12.711754
Show Author Affiliations
Yu-Hao Shih, United Microelectronics Corp. (Taiwan)
George KC Huang, United Microelectronics Corp. (Taiwan)
Chun-Chi Yu, United Microelectronics Corp. (Taiwan)
Mike Adel, KLA-Tencor Israel (Israel)
Chin-Chou Kevin Huang, KLA-Tencor Corp. (United States)
Pavel Izikson, KLA-Tencor Israel (Israel)
Elyakim Kassel, KLA-Tencor Israel (Israel)
Sameer Mathur, KLA-Tencor Corp. (United States)
Chien-Jen Huang, KLA-Tencor Corp. (United States)
David Tien, KLA-Tencor Corp. (United States)
Yosef Avrahamov, KLA-Tencor Israel (Israel)


Published in SPIE Proceedings Vol. 6518:
Metrology, Inspection, and Process Control for Microlithography XXI
Chas N. Archie, Editor(s)

© SPIE. Terms of Use
Back to Top