Share Email Print
cover

Proceedings Paper

Energetic and thermal Sn interactions and their effect on EUVL source collector mirror lifetime at high temperatures
Author(s): J. P. Allain; M. Nieto; M. Hendricks; A. Hassanein; C. Tarrio; S. Grantham; V. Bakshi
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Exposure of collector mirrors facing the hot, dense pinch plasma in plasma-based EUV light sources remains one of the highest critical issues of source component lifetime and commercial feasibility of EUV lithography technology. Studies at Argonne have focused on understanding the underlying mechanisms that hinder collector mirror performance under Sn exposure and developing methods to mitigate them. Both Sn ion irradiation and thermal evaporation exposes candidate mirrors tested (i.e., Ru, Rh and Pd) in the experimental facility known as IMPACT (Interaction of Materials with charged Particles and Components Testing). Studies have led to an understanding of how Sn energetic ions compared to Sn thermal atoms affect three main surface properties of the collector mirror: 1) surface chemical state, 2) surface structure and 3) surface morphology. All these properties are crucial in understanding how collector mirrors will respond to Sn-based EUV source operation. This is primarily due to the correlation of how variation in these properties affects the reflectivity of photons in the EUV spectral range of interest (in-band 13.5-nm). This paper discusses the first property and its impact on 13.5-nm reflectivity. Investigation in the IMPACT experiment has focused on Sn thermal and energetic particle exposure on collector mirrors (Ru, Pd and Rh) and its effect on mirror performance as a function of incident thermal flux, incident ion flux, incident angle and temperature. This is possible by a new state-of-the-art in-situ EUV reflectometry system that measures real time relative EUV reflectivity at 15-degree incidence and 13.5-nm during Sn exposure. These results are then compared to at-wavelength EUV reflectivity measurements using the newly upgraded NIST-SURF facility. Sn energetic ions at 1- keV and fluxes of about 1013 cm-2s-1 are used in conjunction with a moderate flux Sn evaporative source delivering Sn fluences ranging from 1015-1017 cm-2. The temperature of the mirror sample is locally varied between 25 and 200 C with the chemical state of the surface simultaneously monitored using X-ray photoelectron spectroscopy, and lowenergy ion scattering spectroscopy. Results demonstrate the balance between energetic and thermal Sn has on the total Sn surface fraction during exposure and its effect on the structural and reflective properties of the mirror surface.

Paper Details

Date Published: 15 March 2007
PDF: 10 pages
Proc. SPIE 6517, Emerging Lithographic Technologies XI, 65171V (15 March 2007); doi: 10.1117/12.711270
Show Author Affiliations
J. P. Allain, Argonne National Lab. (United States)
M. Nieto, Argonne National Lab. (United States)
M. Hendricks, Argonne National Lab. (United States)
A. Hassanein, Argonne National Lab. (United States)
C. Tarrio, National Institute of Standards and Technology (United States)
S. Grantham, National Institute of Standards and Technology (United States)
V. Bakshi, SEMATECH (United States)


Published in SPIE Proceedings Vol. 6517:
Emerging Lithographic Technologies XI
Michael J. Lercel, Editor(s)

© SPIE. Terms of Use
Back to Top