Share Email Print
cover

Proceedings Paper

Novel CD-SEM calibration reference consisting of 100-nm pitch grating and positional identification mark
Author(s): Yoshinori Nakayama; Hiroki Kawada; Shozo Yoneda; Takeshi Mizuno
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

We fabricated a grating reference with EB cell projection lithography and silicon dry etching, instead of conventional 240-nm pitch grating references fabricated with laser-interferometer lithography and anisotropic chemical wet etching. We developed a novel 100-nm pitch grating reference based on our grating reference for critical dimension-scanning electron microscope (CD-SEM) calibration. We obtained high-contrast secondary electron signals and uniform grating patterns within 3 nm in 3σ during CD-SEM measurements because we eliminated the proximity effect of EB exposure. The reference has an array of 100-nm grating cells in the x-and y-directions. Each cell consists of a 100-nm grating unit, an X-Y coordinate number in the array, and an addressing mark for the CD-SEM to identify the calibration position. These positional identification marks enable accurate calibration by specifying the location of the grating and the number of calibrations. Also, the pitch size of the reference grating can be accurately calibrated by optical diffraction angle measurements with a deep ultraviolet (DUV) laser.

Paper Details

Date Published: 5 April 2007
PDF: 11 pages
Proc. SPIE 6518, Metrology, Inspection, and Process Control for Microlithography XXI, 65183J (5 April 2007); doi: 10.1117/12.710772
Show Author Affiliations
Yoshinori Nakayama, Hitachi, Ltd. (Japan)
Hiroki Kawada, Hitachi High-Technologies Corp. (Japan)
Shozo Yoneda, Hitachi High-Technologies Corp. (Japan)
Takeshi Mizuno, Hitachi High-Tech Science Systems Corp. (Japan)


Published in SPIE Proceedings Vol. 6518:
Metrology, Inspection, and Process Control for Microlithography XXI
Chas N. Archie, Editor(s)

© SPIE. Terms of Use
Back to Top