Share Email Print
cover

Proceedings Paper

Small scale and micro featured functional prototypes generated by laser sintering of polyetheretherketone
Author(s): Thomas Rechtenwald; Hans-Joachim Krauss; Dirk Pohle; Michael Schmidt
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Functional prototypes produced via laser sintering already address the sub millimeter region with resolutions in the low micrometer range. The manufacturing process is very suitable for small scale, micro featured functional polymer parts because of its ability to generate complex and fine shaped geometries including undercuts and pores. The parts are built up layer by layer from three-dimensional data generated by CAD programs or by micro computer tomography as a copy of already existing parts. Up to now this field is dominated by polyamide, a semi-crystalline polymer. This thermoplastic material covers a wide range of applications but requirements concerning a high temperature resistance above 200 °C and tensile strengths above 50 N/mm2 are not fulfilled despite glass fillings. A change in the sintering material can solve this issue. Investigations show that polyetheretherketone (PEEK) which is a high performance polymer with a melting temperature of 346°C can be used for laser sintering. Manufacturing small sized and micro featured parts with enhanced temperature and mechanical properties is possible using an adapted system technology. For minimum vertical outer features a value of about 250 &mgr;m was found, expanded outer features like walls show a width of 650 &mgr;m. A first low boundary for hole-diameters in the feeding 3D-data set was found. As a basic boundary for minimum geometrical features a core roughness average of about 23.3 &mgr;m could be measured.

Paper Details

Date Published: 7 March 2007
PDF: 10 pages
Proc. SPIE 6462, Micromachining Technology for Micro-Optics and Nano-Optics V and Microfabrication Process Technology XII, 646203 (7 March 2007); doi: 10.1117/12.703097
Show Author Affiliations
Thomas Rechtenwald, Bavarian Laser Ctr. GmbH (Germany)
Hans-Joachim Krauss, Bavarian Laser Ctr. GmbH (Germany)
Dirk Pohle, Univ. of Erlangen-Nuremberg (Germany)
Michael Schmidt, Bavarian Laser Ctr. GmbH (Germany)


Published in SPIE Proceedings Vol. 6462:
Micromachining Technology for Micro-Optics and Nano-Optics V and Microfabrication Process Technology XII
Mary-Ann Maher; Thomas J. Suleski; Eric G. Johnson; Harold D. Stewart; Jung-Chih Chiao; Gregory P. Nordin, Editor(s)

© SPIE. Terms of Use
Back to Top