Share Email Print
cover

Proceedings Paper

Processing parameters for the development of glass/ceramic MEMS
Author(s): J. Stillman; J. Judy; H. Helvajian
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

For the past few years we have been investigating the photophysical and photostructurable properties of Foturan, a photostructurable glass ceramic (PSGC) manufactured by Schott Glass Corp. In this paper, we discuss results on using Foturan as a MEMS and MOEMS substrate. Microfabrication in Foturan is possible through patterning by a pulsed UV laser, a subsequent heat treatment step, and chemical etching. In Foturan, the exposed areas undergo a selective phase change in which the native amorphous glass phase converts to a crystalline lithium silicate phase. The degree and type of crystallization are both sensitive functions of the irradiation and thermal processing procedures. Under high exposure dose, the crystallized areas etch up to 30 times faster than the unexposed material in HF, with the etch rate varying with irradiation dose. Because Foturan is transparent at visible through IR wavelengths, direct-write XYZ exposure with a pulsed laser can pattern complex 3-D structures within a sample. Devices made from Foturan may be glass, a glass-ceramic composite, or ceramic, with the final material composition depending on the irradiation and thermal processing procedures. Excellent aspect ratios (>30:1) have already been demonstrated in Foturan. Our interest is in making simple 3-D MEMS structures by implementing cost-effective manufacturing solutions that produce consistent results with a resolution on the order of ten microns.

Paper Details

Date Published: 7 March 2007
PDF: 13 pages
Proc. SPIE 6462, Micromachining Technology for Micro-Optics and Nano-Optics V and Microfabrication Process Technology XII, 64620A (7 March 2007); doi: 10.1117/12.700911
Show Author Affiliations
J. Stillman, The Aerospace Corp. (United States)
Univ. of California, Los Angeles (United States)
J. Judy, Univ. of California, Los Angeles (United States)
H. Helvajian, The Aerospace Corp. (United States)


Published in SPIE Proceedings Vol. 6462:
Micromachining Technology for Micro-Optics and Nano-Optics V and Microfabrication Process Technology XII
Mary-Ann Maher; Thomas J. Suleski; Eric G. Johnson; Harold D. Stewart; Jung-Chih Chiao; Gregory P. Nordin, Editor(s)

© SPIE. Terms of Use
Back to Top