Share Email Print

Proceedings Paper

Q-switched fiber laser using a novel rotary mirror
Author(s): Aland K. Chin; Theodore F. Morse; Fei Luo
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A simple Q-switch, consisting of a rotating planar-mirror where the reflectivity of portions of the surface are high and the reflectivity of the remaining portions are low, is reported. This novel Q-switch is demonstrated using a fiber laser. Using two meters of single-mode, 5 &mgr;m core, Yb-doped fiber, a 40% fiber Bragg-grating (FBG) at 1064 nm, and a single-mode diode-pump at 976 nm, a fiber laser with a threshold power and slope efficiency of approximately 25 mW and 33% was achieved, respectively, with the rotary mirror held stationary at the high-reflectivity region to form part of the laser cavity. With the mirror rotating at a fixed speed of 7200 rpm, pulses with a 140 ns full-width-half-maximum (FWHM) at a repetition rate of 480 Hz were observed. At an optical pump-power of 80 mW, the average power from the Q-switched fiber laser was 3.5 mW resulting in a calculated, peak pulse-power of 48.6 W.

Paper Details

Date Published: 21 February 2007
PDF: 5 pages
Proc. SPIE 6453, Fiber Lasers IV: Technology, Systems, and Applications, 64531S (21 February 2007); doi: 10.1117/12.697675
Show Author Affiliations
Aland K. Chin, The Morse-Chin Group LLC (United States)
Theodore F. Morse, Boston Univ. (United States)
Fei Luo, Boston Univ. (United States)

Published in SPIE Proceedings Vol. 6453:
Fiber Lasers IV: Technology, Systems, and Applications
Donald J. Harter; Andreas Tünnermann; Jes Broeng; Clifford Headley, Editor(s)

© SPIE. Terms of Use
Back to Top