Share Email Print
cover

Proceedings Paper

Iso-sciatic point: novel approach to distinguish shadowing 3-D mask effects from scanner aberrations in extreme ultraviolet lithography
Author(s): Leonardus H. A. Leunissen; Roel Gronheid; Weimin Gao
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Extreme ultraviolet lithography (EUVL) uses a reflective mask with a multilayer coating. Therefore, the illumination is an off-axis ring field system that is non-telecentric on the mask side. This non-zero angle of incidence combined with the three-dimensional mask topography results in the so-called "shadowing effect". The shadowing causes the printed CD to depend on the orientation as well as on the position in the slit and it will significantly influence the image formation [1,2]. In addition, simulations show that the Bossung curves are asymmetrical due to 3-D mask effects and their best focus depends on the shadowing angle [3]. Such tilts in the Bossung curves are usually associated with aberrations in the optical system. In this paper, we describe an approach in which both properties can be disentangled. Bossung curve simulations with varying effective angles of incidence (between 0 and 6 degrees) show that at discrete defocus offsets, the printed linewidth is independent of the incident angle (and thus independent of the shadowing effect), the so-called iso-sciatic (constant shadowing) point. For an ideal optical system this means that the size of a printed feature with a given mask-CD and orientation does not change through slit. With a suitable test structure it is possible to use this effect to distinguish between mask topography and imaging effects from aberrations through slit. Simulations for the following aberrations tested the approach: spherical, coma and astigmatism.

Paper Details

Date Published: 21 June 2006
PDF: 7 pages
Proc. SPIE 6281, 22nd European Mask and Lithography Conference, 628106 (21 June 2006); doi: 10.1117/12.692630
Show Author Affiliations
Leonardus H. A. Leunissen, IMEC vzw (Belgium)
Roel Gronheid, IMEC vzw (Belgium)
Weimin Gao, SIGMA-C Software AG (Germany)


Published in SPIE Proceedings Vol. 6281:
22nd European Mask and Lithography Conference
Uwe F. W. Behringer, Editor(s)

© SPIE. Terms of Use
Back to Top