Share Email Print
cover

Proceedings Paper

Sol-Gel-based 1x2 power splitter for a plastic optical fiber
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

This paper presents a sol-gel based 1×2 power splitter for an optical communication based on the plastic optical fiber. To find out optimum parameters of a power splitter, mode propagation along the splitter was theoretically analyzed using BPM (Beam Propagation Method) and the results show that the distance between two arms at the output port of a splitter should be kept below 100μm in order to increase the output power. The planar lightwave circuit device was fabricated by a nano imprint lithography process followed by a spin coating process. The core size and the length of a power splitter were 230 μm×230 μm and 2 cm, respectively. The measured surface roughness of core/cladding using the AFM (Atomic Force Microscope) was under 100nm. The characteristics of a fabricated power splitter were conducted using an 850nm VCSEL (Vertical Cavity Surface Emission Laser) source and 50:50 power splitting performance was obtained.

Paper Details

Date Published: 19 October 2006
PDF: 8 pages
Proc. SPIE 6374, Optomechatronic Actuators, Manipulation, and Systems Control, 63740J (19 October 2006); doi: 10.1117/12.685669
Show Author Affiliations
H. Jeong, Korea Institute of Industrial Technology (South Korea)
Y. J. Cho, Korea Institute of Industrial Technology (South Korea)
S. T. Kim, Korea Institute of Industrial Technology (South Korea)


Published in SPIE Proceedings Vol. 6374:
Optomechatronic Actuators, Manipulation, and Systems Control
Farrokh Janabi-Sharifi; Yukitoshi Otani, Editor(s)

© SPIE. Terms of Use
Back to Top