Share Email Print
cover

Proceedings Paper

Advanced process control of mask dry-etching using RF sensor
Author(s): Hitoshi Handa; Satoshi Yamauchi; Koji Hosono; Hiroshi Maruyama; Daisuke Nakamura; Toshifumi Yokoyama; Akihiko Naito
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Advanced process control (APC) of photomask dry-etching has been studied for strict mean control of both CD and phase angle of phase shift masks (PSMs). Equations to correlate process information with actual etching results have been developed for this purpose. It is showed that plasma reactance measured with RF sensor has noticeable correlation with Cr etching bias, which is affected by Cr load and condition of etching chamber. Simulation of etching bias based on plasma reactance shows the good agreement with the trend of actual etching results. Expectation of process capability index (Cpk) for mean-to-target (MTT) within 5.2nm is about 1.27, corresponding to CD yield more than 99.9%. In case of MoSi based PSMs, monitoring the sensor outputs is also useful to simulate the etching rate of phase shifter. One simple relationship can be also derived as the case of Cr etching bias. Expected phase error is within 1.5degree in almost cases. In actual photomask fabrication, maintenance of the equation for APC is a critical issue to guarantee the high process yield for a long period. It is showed that trend of the plasma reactance gives the meaningful information effective in automatic maintenance of the equations. As a conclusion, it is proved that our APC method is one of the answers to give the highest MTT yield for both CD and phase angle.

Paper Details

Date Published: 20 May 2006
PDF: 9 pages
Proc. SPIE 6283, Photomask and Next-Generation Lithography Mask Technology XIII, 62830D (20 May 2006); doi: 10.1117/12.681740
Show Author Affiliations
Hitoshi Handa, Fujitsu Ltd. (Japan)
Satoshi Yamauchi, Fujitsu Ltd. (Japan)
Koji Hosono, Fujitsu Ltd. (Japan)
Hiroshi Maruyama, Fujitsu Ltd. (Japan)
Daisuke Nakamura, Dai Nippon Printing Co., Ltd. (Japan)
Toshifumi Yokoyama, Dai Nippon Printing Co., Ltd. (Japan)
Akihiko Naito, Dai Nippon Printing Co., Ltd. (Japan)


Published in SPIE Proceedings Vol. 6283:
Photomask and Next-Generation Lithography Mask Technology XIII
Morihisa Hoga, Editor(s)

© SPIE. Terms of Use
Back to Top