Share Email Print
cover

Proceedings Paper

High-power DPL thin films prepared by ion beam sputtering
Author(s): Hongxiang Liu; Shengming Xiong; Yundong Zhang
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Ion beam sputtering enables high laser damage threshold mirrors to be manufactured. Oxygen partial pressure was found to have significant influence on the microstructure and optical properties of HfO2 thin films deposited by ion beam sputtering (IBS). Atomic force microscopy studies have shown that the surface of single HfO2 films is clearly characterized by deep holes. When oxygen is excessive, the RMS roughness of the surface increases with the presence of the holes, and the transmittance of the single HfO2 layers reduces evidently in the shortwave spectral region. The laser-induced damage threshold (LIDT) of HfO2/SiO2 multilayer stacks was investigated with a diode pump laser at 1064 nm under a certain repetition frequency. The laser-induced damage morphology of DPL thin films were observed by the optical microscope. SiO2 overcoats increase the damage threshold and modify the damage morphology of IBS coatings. The LIDT of the cavity mirrors is > 1 GW/cm2 at 1064 nm (80 ns, 10 KHz).

Paper Details

Date Published: 28 August 2006
PDF: 8 pages
Proc. SPIE 6286, Advances in Thin-Film Coatings for Optical Applications III, 628605 (28 August 2006); doi: 10.1117/12.675254
Show Author Affiliations
Hongxiang Liu, Institute of Optics and Electronics (China)
Shengming Xiong, Institute of Optics and Electronics (China)
Yundong Zhang, Institute of Optics and Electronics (China)


Published in SPIE Proceedings Vol. 6286:
Advances in Thin-Film Coatings for Optical Applications III
Michael J. Ellison, Editor(s)

© SPIE. Terms of Use
Back to Top