Share Email Print
cover

Proceedings Paper

Megawatt peak-power pulsed fiber sources
Author(s): Fabio Di Teodoro
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

We report on master-oscillator/power-amplifier (MOPA) systems featuring Yb-doped photonic crystal fiber (PCF) amplifiers and designed to generate high peak and average powers in beams of good spectral and spatial quality. In the first setup, a 1064nm-wavelength Q-switched Nd:YAG micro-chip laser emitting 500ps pulses at pulse repetition frequency (PRF) ~13.5-kHz is amplified in a 40μm-core, Yb-doped PCF to obtain peak power ~1.1 MW in a diffraction-limited beam (M2 = 1.05) of peak spectral brightness ~ 10 kW/(cm2 sr Hz). In the second setup, a 1ns-pulse Nd:LSB microchip laser (1062nm wavelength, single frequency, PRF = 9.6 kHz) is used to seed a dual-stage amplifier featuring the same 40μm-core Yb-doped PCF as the final stage. From this MOPA, we obtained diffraction-limited pulses of 1.1mJ energy, peak/average power ~1.1 MW/~10.2 W, and spectral linewidth ~9GHz. In the third setup, a single-polarization, single-transverse-mode Yb-doped PCF was used as the final amplifier, which permitted to obtain high-peak-power, spectrally narrow, 100:1 linearly-polarized pulses directly usable for wavelength conversion. The PCF output was frequency doubled, tripled, and quadrupled in nonlinear crystals to generate peak power in excess of 400 kW in the visible and ~200 kW in the UV. Finally, in the fourth setup, an Yb-doped, 70μm-core, intrinsically single-mode photonic-crystal rod (PCR) was used to generate near-diffraction-limited (M2 ~ 1.1) ~1ns pulses of 2.25mJ energy and peak-power >2.2 MW.

Paper Details

Date Published: 7 June 2006
PDF: 8 pages
Proc. SPIE 6261, High-Power Laser Ablation VI, 62611N (7 June 2006); doi: 10.1117/12.669452
Show Author Affiliations
Fabio Di Teodoro, Aculight Corp. (United States)


Published in SPIE Proceedings Vol. 6261:
High-Power Laser Ablation VI
Claude R. Phipps, Editor(s)

© SPIE. Terms of Use
Back to Top