Share Email Print
cover

Proceedings Paper

Improved throughput of deep high-aspect-ratio trenches using split-beam laser ablation
Author(s): David M. Braun; Jianhui Gu; Richard J. Oram
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

A 20W 355nm DPSS Q-switched nanosecond pulse width laser, with external beam-splitting optics, was used to simultaneously ablate two 600μm deep, 140μm wide, 13.4mm long blind trenches in silicon using a five line wide cut strategy, achieving a 1.22x throughput improvement compared with a single-beam 20W laser configuration. Improved split-beam throughput was achieved because overhead time consisting of non-cut time during galvanometer retrace and turn-around movements and the time taken to ablate shoulder formations, were found to be approximately independent of laser power. With this split-beam approach, where two identical trenches are simultaneously cut, overhead time is split between the two trenches when cut time/die is calculated, halving the effective overhead time/die, and thereby improving throughput. Specific throughput improvement depends upon cut strategy, trench size, and insertion loss of the beam-splitting optics. Beam splitting optics consisted of a half-wave plate, Glan-laser polarizing prism, and mirror. Making use of the linear polarization characteristic of laser light, rotation of the half-wave plate was used to adjust the relative power in each beam, and thereby equalize the ablation rate of each beam. Adjustment of the mirror angle determined the separation between the two trenches.

Paper Details

Date Published: 31 May 2006
PDF: 5 pages
Proc. SPIE 6261, High-Power Laser Ablation VI, 62612C (31 May 2006); doi: 10.1117/12.668609
Show Author Affiliations
David M. Braun, Hewlett-Packard Co. (United States)
Jianhui Gu, Hewlett Packard Singapore (Private) Ltd. (Singapore)
Richard J. Oram, Hewlett-Packard Co. (United States)


Published in SPIE Proceedings Vol. 6261:
High-Power Laser Ablation VI
Claude R. Phipps, Editor(s)

© SPIE. Terms of Use
Back to Top