Share Email Print
cover

Proceedings Paper

Automatic procedure for aberrations compensation in digital holographic microscopy
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Digital Holographic Microscopy (DHM) is a powerful imaging technique allowing, from a single amplitude image acquisition (hologram), the reconstruction of the entire complex wave front (amplitude and phase), reflected by or transmitted through an object. Because holography is an interferometric technique, the reconstructed phase leads to a sub-wavelength axial accuracy (below λ/100). Nevertheless, this accuracy is difficult to obtain from a single hologram. Indeed, the reconstruction process consisting to process the hologram with a digital reference wave (similar to classical holographic reconstruction) seems to need a-priori knowledge about the physical values of the setup. Furthermore, the introduction of a microscope objective (MO), used to improve the lateral resolution, introduces a wave front curvature in the object wave front. Finally, the optics of the set-up can introduce different aberrations that decrease the quality and the accuracy of the phase images. We propose here an automatic procedure allowing the adjustment of the physical values and the compensation for the phase aberrations. The method is based on the extraction of reconstructed phase values, along line profiles, located on or around the sample, in assumed to be flat area, and which serve as reference surfaces. The phase reconstruction parameters are then automatically adjusted by applying curve-fitting procedures on the extracted phase profiles. An example of a mirror and a USAF test target recorded with high order aberrations (introduced by a thick tilted plate placed in the set-up) shows that our procedure reduces the phase standard deviation from 45 degrees to 5 degrees.

Paper Details

Date Published: 27 April 2006
PDF: 10 pages
Proc. SPIE 6188, Optical Micro- and Nanometrology in Microsystems Technology, 618805 (27 April 2006); doi: 10.1117/12.662068
Show Author Affiliations
Tristan Colomb, École Polytechnique Fédérale de Lausanne (Switzerland)
Jonas Kühn, Ecole Polytechnique Fédérale de Lausanne (Switzerland)
Etienne Cuche, Lyncée Tec SA (Switzerland)
Florian Charrière, École Polytechnique Fédérale de Lausanne (Switzerland)
Frédéric Montfort, Lyncée Tec SA (Switzerland)
Anca Marian, École Polytechnique Fédérale de Lausanne (Switzerland)
Nicolas Aspert, Lyncée Tec SA (Switzerland)
Pierre Marquet, Ctr. Hospitalier Universitaire Vaudois (Switzerland)
Christian Depeursinge, École Polytechnique Fédérale de Lausanne (Switzerland)


Published in SPIE Proceedings Vol. 6188:
Optical Micro- and Nanometrology in Microsystems Technology
Christophe Gorecki; Anand K. Asundi; Wolfgang Osten, Editor(s)

© SPIE. Terms of Use
Back to Top