Share Email Print
cover

Proceedings Paper

Delivery of Erbium:YAG laser radiation through side-firing germanium oxide fibers
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The Erbium:YAG laser is currently being tested experimentally for endoscopic applications in urology, including more efficient laser lithotripsy and more precise incision of urethral strictures than the Holmium:YAG laser. While side-firing silica fibers are available for use with the Ho:YAG laser in urology, no such fibers exist for use with the Er:YAG laser. These applications may benefit from the availability of a side-firing, mid-infrared optical fiber capable of delivering the laser radiation at a 90-degree angle to the tissue. The objective of this study is to describe the simple construction and characterization of a side-firing germanium oxide fiber for potential use in endoscopic laser surgery. Side-firing fibers were constructed from 450-micron-core germanium oxide fibers of 1.45-m-length by polishing the distal tip at a 45-degree angle and placing a 1-cm-long protective quartz cap over the fiber tip. Er:YAG laser radiation with a wavelength of 2.94 microns, pulse duration of 300 microseconds, pulse repetition rate of 3 Hz, and pulse energies of from 5 to 550 mJ was coupled into the fibers. The fiber transmission rate and damage threshold measured 48 +/- 4 % and 149 +/- 37 mJ, respectively (n = 6 fibers). By comparison, fiber transmission through normal germanium oxide trunk fibers measured 66 +/- 3 %, with no observed damage (n = 5 fibers). Sufficient pulse energies were transmitted through the side-firing fibers for contact tissue ablation. Although these initial tests are promising, further studies will need to be conducted, focusing on assembly of more flexible, smaller diameter fibers, fiber bending transmission tests, long-term fiber reliability tests, and improvement of the fiber output spatial beam profile.

Paper Details

Date Published: 15 February 2006
PDF: 5 pages
Proc. SPIE 6083, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications VI, 60830O (15 February 2006); doi: 10.1117/12.659598
Show Author Affiliations
Anthony K Ngo, Johns Hopkins Univ. (United States)
Nathaniel M. Fried, Johns Hopkins Univ. (United States)


Published in SPIE Proceedings Vol. 6083:
Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications VI
Israel Gannot, Editor(s)

© SPIE. Terms of Use
Back to Top