Share Email Print
cover

Proceedings Paper

Halide etching for tin EUV optics cleaning
Author(s): Hyung Joo Shin; Brian E. Jurczyk; D. N. Ruzic; Robert Bristol
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Tin (Sn) has the advantage of delivering higher conversion efficiency than xenon. However, the use of a condensable fuel in a lithography system leads to some additional challenges for maintaining a satisfactory lifetime of the EUV optics. A critical issue leading to decreased mirror lifetime is the buildup of debris on the surface of the primary mirror optics that comes from the use of Sn in GDPP or LPP. This leads to a decreased reflectivity from the added material thickness and increased surface roughness that contributes to scattering. Reactive ion etching (RIE) with halide ions is one potential solution to this problem. Encouraging results were obtained using argon/chlorine and other gas mixtures in a PlasmaTherm SLR-770 inductively coupled plasma reactive ion etcher at the Micro and Nanotechnology Laboratory at the University of Illinois. The results showed that at low sample bias tin could be etched at a rate of 278 nm/min with a selectivity of tin removal rate to SiO2 removal rate over 9000. However, the use of the etcher at a multi-user facility did not provide adequate control over experimental parameters and reproducible cleanliness of the system. Moreover, the simulating the real optics in the PlasmaTherm SLR-770 was not allowed. Hence, a collector mock-up which can simulate the real collector optics was constructed. This work presents results for etch rate and selectivity for halide etching of tin in the Plasma-Material Interaction Group's new reactive ion etching experiment where control over important parameters such as gas mixture, RF power, sample bias, and sample temperature; as well as overall system cleanliness is maintained. The effect of these parameters on etch rate and selectivity will be presented. In addition, the results of our recipes in the optics mock-up will be shown.

Paper Details

Date Published: 18 January 2007
PDF: 8 pages
Proc. SPIE 6151, Emerging Lithographic Technologies X, 615133 (18 January 2007); doi: 10.1117/12.656638
Show Author Affiliations
Hyung Joo Shin, Univ. of Illinois at Urbana-Champaign (United States)
Brian E. Jurczyk, Univ. of Illinois at Urbana-Champaign (United States)
D. N. Ruzic, Univ. of Illinois at Urbana-Champaign (United States)
Robert Bristol, Intel Corp. (United States)


Published in SPIE Proceedings Vol. 6151:
Emerging Lithographic Technologies X
Michael J. Lercel, Editor(s)

© SPIE. Terms of Use
Back to Top