Share Email Print
cover

Proceedings Paper

Hybrid integration of a CMOS active quench and reset circuit for a geiger-mode avalanche photodiode
Author(s): Donal Cronin; Alan P. Morrison; Kevin G. McCarthy
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

An active quench and reset circuit (AQRC) is an essential control circuit for ensuring high-speed photon counting with geiger-mode avalanche photodiodes (GMAPs). Its purpose is to turn off the detector when an avalanche has been detected, register a photon count and then reset the device to its quiescent bias voltage after a preset interval, to enable further avalanche events to be counted. This paper presents an AQRC-IC, developed using Europractice's ASIC Service. The purpose of the design was to develop a high-speed CMOS AQRC for hybrid integration with in-house GMAPs. The designed ASIC, developed using AMS' 3.3 V 0.35 μm CMOS process models, includes a ballast resistor for the external GMAP, a comparator sensing-stage, an active quench and an active reset stage. The hold-off time is determined using external silicon delay lines and an FPGA. The ASIC is implemented on a ceramic DIP as is the GMAP, and the AQRC prototype achieves a saturated count-rate of 5 Mcounts/s, an active quench of 45 ns, an active reset of 30 ns and possible increments of the hold-off time between 50 ns and 500 ns.

Paper Details

Date Published: 3 March 2006
PDF: 10 pages
Proc. SPIE 6124, Optoelectronic Integrated Circuits VIII, 61240R (3 March 2006); doi: 10.1117/12.644108
Show Author Affiliations
Donal Cronin, Univ. College Cork (Ireland)
Alan P. Morrison, Univ. College Cork (Ireland)
Kevin G. McCarthy, Univ. College Cork (Ireland)


Published in SPIE Proceedings Vol. 6124:
Optoelectronic Integrated Circuits VIII
Louay A. Eldada; El-Hang Lee, Editor(s)

© SPIE. Terms of Use
Back to Top