Share Email Print
cover

Proceedings Paper

A prototype system for 3D measurement using flexible calibration method
Author(s): Masanori Fukuda; Takeo Miyasaka; Kazuo Araki
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

We developed a 3D measurement system consists of a camera and a projector which can be calibrated easily at short times. In this system, the camera and the projector are calibrated in advance with Zhang's calibration method. The measurement procedure in this system is as follows. A calibrated camera and a calibrated projector are put in front of the calibration plane. Then the relative pose between the camera and the projector can be computed by projecting a number of light patterns from the projector onto the calibration plane and taking those images with the camera. And this system performs a 3D measurement with the gray code pattern projection. Since this system can be calibrated easily, this system does not need to be fixed exactly and the configuration of this system, which is the baseline and the measurement range, can be changed freely depending on the target and the purpose. This system can obtain a range data in a high accuracy of an error about 0.1% in spite of the fact that this system can be calibrated easily.

Paper Details

Date Published: 27 January 2006
PDF: 9 pages
Proc. SPIE 6056, Three-Dimensional Image Capture and Applications VII, 60560X (27 January 2006); doi: 10.1117/12.642848
Show Author Affiliations
Masanori Fukuda, Chukyo Univ. (Japan)
Takeo Miyasaka, Chukyo Univ. (Japan)
Kazuo Araki, Chukyo Univ. (Japan)


Published in SPIE Proceedings Vol. 6056:
Three-Dimensional Image Capture and Applications VII
Brian D. Corner; Peng Li; Matthew Tocheri, Editor(s)

© SPIE. Terms of Use
Back to Top