Share Email Print
cover

Proceedings Paper

Micropatterning research of silicon-based ferroelectric PMNT thin films
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Lead magnesium niobate-lead titanate ((1-x) Pb (Mg1/3Nb2/3-xPbTiO3, PMNT) solid solution thin films were prepared on silicon substrates by Sol-Gel method. The well crystallized thin films were prepared on 700°C for 1 hour and micro-patterning of PMNT thin films were researched by wet etching. PMNT etch rate higher than 2.4μm/min could be obtained with well etch profile by using HF/HNO3/H2O. XRD analysis and ferroelectric property test showed that there were not the crystal lattice distortion and ferroelectric property change during PMNT etching. In the paper, the key technologies in the preparation and patterning of PMNT thin films were solved and had laid good technology foundation for the preparation of silicon-base ferroelectric thin film microfabricated devices.

Paper Details

Date Published: 4 January 2006
PDF: 5 pages
Proc. SPIE 6037, Device and Process Technologies for Microelectronics, MEMS, and Photonics IV, 603718 (4 January 2006); doi: 10.1117/12.638531
Show Author Affiliations
Qingtao Zhang, Institute of Electrical Engineering (China)
Yanqiu Li, Institute of Electrical Engineering (China)
Yonghong Shang, Institute of Electrical Engineering (China)


Published in SPIE Proceedings Vol. 6037:
Device and Process Technologies for Microelectronics, MEMS, and Photonics IV
Jung-Chih Chiao; Andrew S. Dzurak; Chennupati Jagadish; David V. Thiel, Editor(s)

© SPIE. Terms of Use
Back to Top