Share Email Print
cover

Proceedings Paper

Mechanical reliability of optical fibre for strain sensors
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The reliability of optical fibre for sensor applications is an important issue since they are embedded in structures. The production of these sensors sometimes requires that the coating is stripped from the optical fibres with hot sulphuric acid. Tests conducted on the static fatigue of optical fibres under water, where the time to failure is measured at different stresses showed a deviation from the power-law equation. This indicates an increase in the stress corrosion parameter, n, at lower stress. Tests done using a two-point bend machine to measure the fracture strength of fibre at different time intervals after previous loading to a fixed stress showed a slight increase with time before the strength starts decreasing. This can be explained by the suggestion that the silica bonds deform by twisting to decrease the stretch in the bonds themselves before cracking. However, this might be a problem for optical fibres strain sensors used at high stress.

Paper Details

Date Published: 23 May 2005
PDF: 4 pages
Proc. SPIE 5855, 17th International Conference on Optical Fibre Sensors, (23 May 2005); doi: 10.1117/12.623655
Show Author Affiliations
Yehia M. El Shazly, Univ. of Birmingham (United Kingdom)
Stephen N. Kukureka, Univ. of Birmingham (United Kingdom)


Published in SPIE Proceedings Vol. 5855:
17th International Conference on Optical Fibre Sensors
Marc Voet; Reinhardt Willsch; Wolfgang Ecke; Julian Jones; Brian Culshaw, Editor(s)

© SPIE. Terms of Use
Back to Top