Share Email Print
cover

Proceedings Paper

Surface figuring and measurement methods with spatial resolution close to 0.1 mm for x-ray mirror fabrication
Author(s): H. Mimura; H. Yumoto; S. Matsuyama; K. Yamamura; Y. Sano; K. Endo; Y. Mori; Y. Nishino; M. Yabashi; K. Tamasaku; T. Ishikawa; K. Yamauchi
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

We developed the computer-controlled figuring system having controllability of removal depths with nanometer accuracy and spatial resolutions close to 0.1mm. In this system, Elastic Emission Machining (EEM) using nozzle-type EEM head and Microstitching Interferometry (MSI) are employed as a machining method and a figure measurement method. In EEM, very small stationary spot profiles ware obtained, selecting small circle nozzle aperture of a 0.15 mm diameter. Surface figuring is performed with controlling scanning speeds of sample stages, so that a measured profile turned into designed one. MSI, which was developed on the basis of interferometric stitching technologies, has reproducibility at subnanometer level and with spatial resolution of 0.03 mm. In this study, we demonstrated computer controlled figuring, focusing on removal of high frequency figurer errors. Figure accuracy of 0.2 nm (RMS) was achieved in a cross-section profile with a length of 90mm.

Paper Details

Date Published: 16 September 2005
PDF: 8 pages
Proc. SPIE 5921, Advances in Metrology for X-Ray and EUV Optics, 59210M (16 September 2005); doi: 10.1117/12.623103
Show Author Affiliations
H. Mimura, Osaka Univ. (Japan)
H. Yumoto, Osaka Univ. (Japan)
S. Matsuyama, Osaka Univ. (Japan)
K. Yamamura, Osaka Univ. (Japan)
Y. Sano, Osaka Univ. (Japan)
K. Endo, Osaka Univ. (Japan)
Y. Mori, Osaka Univ. (Japan)
Y. Nishino, SPring-8/JASRI (Japan)
M. Yabashi, SPring-8/RIKEN (Japan)
K. Tamasaku, SPring-8/JASRI (Japan)
T. Ishikawa, SPring-8/JASRI (Japan)
SPring-8/RIKEN (Japan)
K. Yamauchi, Osaka Univ. (Japan)


Published in SPIE Proceedings Vol. 5921:
Advances in Metrology for X-Ray and EUV Optics
Lahsen Assoufid; Peter Z. Takacs; John S. Taylor, Editor(s)

© SPIE. Terms of Use
Back to Top