Share Email Print
cover

Proceedings Paper

Geometrically constrained parasitic-aware synthesis of analog ICs
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

In order to speed up the design process of analog ICs, iterations between different design stages should be avoided as much as possible. More specifically, spins between electrical and physical synthesis should be reduced for this is a very time-consuming task: if circuit performance including layout-induced degradations proves unacceptable, a re-design cycle must be entered, and electrical, physical, or both synthesis processes, would have to be repeated. It is also worth noting that if geometric optimization (e.g., area minimization) is undertaken after electrical synthesis, it may add up as another source of unexpected degradation of the circuit performance due to the impact of the geometric variables (e.g., transistor folds) on the device and the routing parasitic values. This awkward scenario is caused by the complete separation of said electrical and physical synthesis, a design practice commonly followed so far. Parasitic-aware synthesis, consisting in including parasitic estimates to the circuit netlist directly during electrical synthesis, has been proposed as solution. While most of the reported contributions either tackle parasitic-aware synthesis without paying special attention to geometric optimization or approach both issues only partially, this paper addresses the problem in a unified way. In what has been called layout-aware electrical synthesis, a simulation-based optimization algorithm explores the design space with geometric variables constrained to meet certain user-defined goals, which provides reliable estimates of layout-induced parasitics at each iteration, and, thereby, accurate evaluation of the circuit ultimate performance. This technique, demonstrated here through several design examples, requires knowing layout details beforehand; to facilitate this, procedural layout generation is used as physical synthesis approach due to its rapidness and ability to capture analog layout know-how.

Paper Details

Date Published: 30 June 2005
PDF: 12 pages
Proc. SPIE 5837, VLSI Circuits and Systems II, (30 June 2005); doi: 10.1117/12.607933
Show Author Affiliations
Rafael Castro-Lopez, Instituto de Microelectronica de Sevilla, Ctr. Nacional de Microelectronica (Spain)
Francisco V. Fernandez, Instituto de Microelectronica de Sevilla, Ctr. Nacional de Microelectronica (Spain)
Angel Rodriguez Vazquez, Instituto de Microelectronica de Sevilla, Ctr. Nacional de Microelectronica (Spain)


Published in SPIE Proceedings Vol. 5837:
VLSI Circuits and Systems II
Jose Fco. Lopez; Francisco V. Fernandez; Jose Maria Lopez-Villegas; Jose M. de la Rosa, Editor(s)

© SPIE. Terms of Use
Back to Top