Share Email Print
cover

Proceedings Paper

Accurate alignment technique for nanoimprint lithography
Author(s): Li Jiang; Martin Feldman
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The inherently high resolution of imprint lithography has the promise of extending integrated circuit minimum feature sizes down to the 10 nm region. However, the main effort of companies building nanoimprint tools has been directed to the development of robust printing techniques, rather than to alignment. Consequently, no alignment system currently exists for nanoimprint lithography that is capable of the alignment accuracy required by the semiconductor industry. This paper proposes a solution to the problem of obtaining accurate alignment over an extended imprinted area. On the one hand, alignment is difficult to perform when the mold template and the substrate are in contact, or nearly in contact. On the other hand, if they are widely separated, the accuracy is limited by the difficulty of simultaneously imaging fine features on both of them. However, by using orthogonal polarizations, sharp images of the template and substrate can be obtained when they are separated by 30 to 40 μm. Previous experience with a dual focus x-ray alignment microscope indicates that this alignment technique will readily meet the 18 nm 3 σ tolerance required by the semiconductor industry at the 45 nm node. Here the technique is adapted for nanoimprint lithography by employing transparent bulk mold materials (e.g. quartz) with opaque alignment targets on the surface. In addition, a flexure stage capable of reproducibly bringing the mold template and the substrate into contact is integrated into the system, so that after the alignment is performed it can be maintained during imprinting.

Paper Details

Date Published: 10 May 2005
PDF: 9 pages
Proc. SPIE 5752, Metrology, Inspection, and Process Control for Microlithography XIX, (10 May 2005); doi: 10.1117/12.600342
Show Author Affiliations
Li Jiang, Louisiana State Univ. (United States)
Martin Feldman, Louisiana State Univ. (United States)


Published in SPIE Proceedings Vol. 5752:
Metrology, Inspection, and Process Control for Microlithography XIX
Richard M. Silver, Editor(s)

© SPIE. Terms of Use
Back to Top