Share Email Print
cover

Proceedings Paper

Influence of focus variation on linewidth measurements
Author(s): Maki Tanaka; John S. Villarrubia; Andras E. Vladar
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The influence of spatial resolution on linewidth measurements in the critical dimension scanning electron microscope (CD-SEM) was investigated experimentally. Measurement bias variation and measurement repeatabilities of four edge detection algorithms were evaluated with a series of images at varying focus in order to determine the effect of resolution variation. Three of these algorithms, maximum derivative, regression to baseline, and sigmoidal fit, are commonly used on commercial CD-SEMs, and the other is a model-based library (MBL) approach that detects the line edge by comparing CD-SEM line scans to a library of simulated line scans. MBL is able to take into account beam size and other parameters (including sidewall angle of the line structure). These algorithms were applied to images of polycrystalline silicon lines with various sidewall angles taken under different focus conditions. In general, it was observed that repeatability is degraded by defocus, and bias varied with focus and target shape. These results indicate that if two or more tools had different resolutions, measurement results would have different biases depending on target shape. The amounts of errors depend on the algorithms, with MBL the most stable against focus variation. However, it still has some systematic errors and outliers far from best focus. Investigations of electron distributions and the effect of electron incident angle were performed for a better model.

Paper Details

Date Published: 10 May 2005
PDF: 12 pages
Proc. SPIE 5752, Metrology, Inspection, and Process Control for Microlithography XIX, (10 May 2005); doi: 10.1117/12.599741
Show Author Affiliations
Maki Tanaka, Hitachi, Ltd. (Japan)
National Institute of Standards and Technology (United States)
John S. Villarrubia, National Institute of Standards and Technology (United States)
Andras E. Vladar, National Institute of Standards and Technology (United States)


Published in SPIE Proceedings Vol. 5752:
Metrology, Inspection, and Process Control for Microlithography XIX
Richard M. Silver, Editor(s)

© SPIE. Terms of Use
Back to Top