Share Email Print

Proceedings Paper

Mechanism study of defect improvement by short develop time process
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Recently, importance of reducing the post development defects is being emphasized. There are a lot of countermeasures to reduce the defects. However, most of them are quite costly or require complicated process systems. In our previous report, it was found that short develop time process is effective to reduce micro bridge defects for a 193 nm resist, although the mechanism of this phenomenon was unclear. In this study, we focused on the properties of a 193 nm resist during the development process for the purpose of finding the mechanism of defect reduction by short develop time process. We first evaluated the effect of “exposure dose” and “developing time”; two parameters which were inevitably changed in short develop time process. Our original defect evaluation method was employed for this purpose. Evaluation results indicated that increased exposure dose to optimize critical dimension (CD) in short develop time process has a larger impact on defectivity than shortening developing time itself. Infrared (IR) spectroscopy study of the resist film revealed that there was a good correlation between defectivity and deprotection ratio of the resist polymer, which suggested that polarity of the resist was a key to control defectivity. Finally, impact of resist polarity on defectivity was confirmed by changing the polarity of the rinse solution. Based on these experimental results, we proposed the mechanism of development defect improvement by short develop time process.

Paper Details

Date Published: 4 May 2005
PDF: 12 pages
Proc. SPIE 5753, Advances in Resist Technology and Processing XXII, (4 May 2005); doi: 10.1117/12.599171
Show Author Affiliations
Osamu Tamada, Dainippon Screen Manufacturing Co., Ltd. (Japan)
Masakazu Sanada, Dainippon Screen Manufacturing Co., Ltd. (Japan)

Published in SPIE Proceedings Vol. 5753:
Advances in Resist Technology and Processing XXII
John L. Sturtevant, Editor(s)

© SPIE. Terms of Use
Back to Top