Share Email Print
cover

Proceedings Paper

Surface defect inspection system with an optical spatial frequency filter for semiconductor patterned wafers
Author(s): Yoko Miyazaki; Hitoshi Tanaka; Nobuyuki Kosaka; Toshimasa Tomoda
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

We previously developed a surface defect inspection system for semiconductor patterned wafers. The system utilizes spatial frequency technology, where regular periodic patterns were eliminated, and only defects are imaged at the image plane by using a spatial frequency filter. The system had a detection sensitivity of 0.8 micrometers and an inspection speed of 30 minutes for the 6 inch wafer. With the advent of 16 MDRAMs having a design rule of 0.5 micrometers , however, higher detection sensitivity of about 0.3 micrometers is required. Thus, we have been developing an advanced inspection system based on the previous achievement to meet the emerging needs. The problem to tackle is the signal-to-noise-ratio (SNR) improvement. To achieve higher SNR on the filtered image, we introduced the following two ideas: (1) angled incidence of the laser on the wafer surface and the avoidance of regular reflection light entering the optical system, and (2) a spatial filter which is composed of two photo-plates facing each other. We have developed an optical imaging system and have experimentally shown that the system images defects down to 0.2 micrometers with adequate SNR with a view field of 1000 X 1000 micrometers .

Paper Details

Date Published: 1 June 1992
PDF: 11 pages
Proc. SPIE 1673, Integrated Circuit Metrology, Inspection, and Process Control VI, (1 June 1992); doi: 10.1117/12.59810
Show Author Affiliations
Yoko Miyazaki, Mitsubishi Electric Corp. (Japan)
Hitoshi Tanaka, Mitsubishi Electric Corp. (Japan)
Nobuyuki Kosaka, Mitsubishi Electric Corp. (Japan)
Toshimasa Tomoda, Mitsubishi Electric Corp. (Japan)


Published in SPIE Proceedings Vol. 1673:
Integrated Circuit Metrology, Inspection, and Process Control VI
Michael T. Postek, Editor(s)

© SPIE. Terms of Use
Back to Top