Share Email Print
cover

Proceedings Paper

Improving resist performance by PROMOTE processing
Author(s): Han J. Dijkstra
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In PROMOTE processing of novolac-diazonaphtoquinone (DNQ) resists, a deep UV flood exposure is given under water-free conditions during the post exposure bake. When exposure is done under water-free conditions DNQ forms an ester with the novolac, which is insoluble in TMAH. Due to the high absorption of the resist for the DUV flood exposure wavelength, ester is mainly formed in the top of the formerly unexposed regions. With DRM measurements it is shown that PROMOTE can enhance both development contrast and, due to the ester gradient in the depth of the resist, profile slopes. Therefore, dyed resist processing benefits more from PROMOTE than transparent resist, especially when degradation of the top of the resist profiles is the limiting factor, i.e., near the resolution limit of the stepper/resist combination, PROMOTE is advantageous. When the development process is left unchanged, the improvement with PROMOTE is attained at the expense of a higher imaging dose. An alternative for a higher imaging dose is a more aggressive development process, which can be achieved by a longer development time or a higher normality developer. The best results with PROMOTE are obtained when a more aggressive development process is used.

Paper Details

Date Published: 1 June 1992
PDF: 12 pages
Proc. SPIE 1672, Advances in Resist Technology and Processing IX, (1 June 1992); doi: 10.1117/12.59763
Show Author Affiliations
Han J. Dijkstra, Philips Research Labs. (Netherlands)


Published in SPIE Proceedings Vol. 1672:
Advances in Resist Technology and Processing IX
Anthony E. Novembre, Editor(s)

© SPIE. Terms of Use
Back to Top