Share Email Print
cover

Proceedings Paper

PLD of high-k dielectric films on silicon
Author(s): Markus Ratzke; Mathias Kappa; Dirk Wolfframm; Simona Kouteva-Arguirova; Juergen Reif
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Thin films of high-k materials praseodymium oxide (PrxOy) and hafnium oxide (HfOx) were deposited on silicon (100) surfaces by pulsed laser deposition (PLD), using the third harmonic of a Nd:YAG laser. The two materials are compared with respect to their morphology, in dependence on the substrate temperature during deposition, and their chemical composition and crystalline structure, in particular at the interface. The films of both oxides exhibit a grainy structure when deposited at substrate temperatures below 750°C, with the grain size increasing from ≈ 40 nm at room temperature to ≈ 100 nm at 750°C. However, the PrxOy films are much more uniform than hafnia, the latter exhibiting increasingly larger holes, reaching several nm into the silicon substrate. For a substrate temperature of 900°C, the film morphology for PrxOy completely changes to much larger crystalline areas, while for HfOx the role of holes in the film becomes substantial. Also, the interface chemistry is significantly different for both materials: a silicate formation for PrxOy and a rich abundance of SiO2 and a silicide for hafnia. Finally, our PrxOy-films exert compressive stress on the substrate, for HfOx-films tensile stress is observed which, however, may also result from interfacial SiO2.

Paper Details

Date Published: 8 October 2004
PDF: 6 pages
Proc. SPIE 5662, Fifth International Symposium on Laser Precision Microfabrication, (8 October 2004); doi: 10.1117/12.596388
Show Author Affiliations
Markus Ratzke, Brandenburgische Technische Univ. Cottbus (Germany)
Mathias Kappa, Brandenburgische Technische Univ. Cottbus (Germany)
Dirk Wolfframm, Siltronic AG (Germany)
Simona Kouteva-Arguirova, Brandenburgische Technische Univ. Cottbus (Germany)
Juergen Reif, Brandenburgische Technische Univ. Cottbus (Germany)


Published in SPIE Proceedings Vol. 5662:
Fifth International Symposium on Laser Precision Microfabrication
Isamu Miyamoto; Henry Helvajian; Kazuyoshi Itoh; Kojiro F. Kobayashi; Andreas Ostendorf; Koji Sugioka, Editor(s)

© SPIE. Terms of Use
Back to Top