Share Email Print
cover

Proceedings Paper

Microfabrication of glass plates by nanosecond FHG Nd:YAG laser
Author(s): Susumu Nakamura; Shigeyuki Tanaka; Yoshiro Ito
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

We have investigated about machining of glass plates by a UV laser, a nanosecond FHG Nd:YAG laser. Laser wavelength was 266 nm and pulse width was about 4 - 6 ns. Repetition rate of the laser pulse was up to 30Hz. Borosilicate glass plate of 1 mm thick was irradiated by laser pulse in air. An X-Y axis precision trnaslation stage was used to change the laser irradiation spot on the glass surface. The spot size of focusing beam at the glass surface was varied by changing the distance between the glass and a focal lens. Focal position of the focal lens was determined by measuring burn patterns on thermo-sensitive paper as a function of distance between the lens and the paper. When the glass plate was placed at the focal point, radial cracks occurred on the surface. When the glass plate was moved toward the lens by 0.7 mm, ablation still took place and provided good quality groove on the surface with no significant cracks. The cross section of the groove was conical for slower scanning speed while it became shallow dip with rather flat bottom for faster scan speed. The grove depth increased linearly as the laser fluence increased.

Paper Details

Date Published: 8 October 2004
PDF: 6 pages
Proc. SPIE 5662, Fifth International Symposium on Laser Precision Microfabrication, (8 October 2004); doi: 10.1117/12.596289
Show Author Affiliations
Susumu Nakamura, Nagaoka National College of Technology (Japan)
Shigeyuki Tanaka, Nagaoka National College of Technology (Japan)
Yoshiro Ito, Nagaoka Univ. of Technology (Japan)


Published in SPIE Proceedings Vol. 5662:
Fifth International Symposium on Laser Precision Microfabrication
Isamu Miyamoto; Henry Helvajian; Kazuyoshi Itoh; Kojiro F. Kobayashi; Andreas Ostendorf; Koji Sugioka, Editor(s)

© SPIE. Terms of Use
Back to Top