Share Email Print
cover

Proceedings Paper

Compensation of model eye’s aberration by using deformable mirror
Author(s): Hiroyuki Kawashima; Michiko Nakanishi; Noriko Takeda; Isao Minegishi; Akio Kobayashi
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

This paper reports on compensation for human eye aberration using a membrane deformable mirror(DM) which is fabricated by the MEMS process. The DM consists of a silicon(Si) membrane formed by processing of an SOI wafer and 85 electrodes. The diameter of Si membrane is 12mm and the maximum displacement is 16μm at a driving voltage of 180V. We have successfully demonstrated compensation for a model eye's aberration by using the DM. The model eye's aberration measured by the Shack-Hartmann wavefront sensor was expanded into Zernike polynomials and the driving voltages for the DM were decided so that the membrane shape would cancel out the eye's aberration by using appropriate voltage arrangements for each of the Zernike polynomials, these arrangements being predetermined experimentally. We have corrected the aberration of the model eye to less than 0.1μm-RMS. In this experiment, the effective diameter of the DM was 7.5mm, and the pupil of the model eye was 8.5mm.

Paper Details

Date Published: 22 January 2005
PDF: 11 pages
Proc. SPIE 5717, MEMS/MOEMS Components and Their Applications II, (22 January 2005); doi: 10.1117/12.589942
Show Author Affiliations
Hiroyuki Kawashima, Topcon Corp. (Japan)
Michiko Nakanishi, Topcon Corp. (Japan)
Noriko Takeda, Topcon Corp. (Japan)
Isao Minegishi, Topcon Corp. (Japan)
Akio Kobayashi, Topcon Corp. (Japan)


Published in SPIE Proceedings Vol. 5717:
MEMS/MOEMS Components and Their Applications II
Albert K. Henning, Editor(s)

© SPIE. Terms of Use
Back to Top