Share Email Print

Proceedings Paper

Design and structural/optical analysis of a kinematic mount for the testing of silicon carbide mirrors at cryogenic temperatures
Author(s): Christopher Chrzanowski; Charles Frohlich; Badri Shirgur; Ronald G. Mink
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A kinematic mount has been designed to support two Silicon Carbide-based spherical mirrors during cryogenic testing at the Goddard Space Flight Center. The mirrors are flight representative test mirrors for the NIRSpec Instrument of the James Webb Space Telescope (JWST), provided by Galileo Avionica of Florence, Italy. One is cold-pressed Silicon Carbide (SiC) and one is Carbon reinforced Silicon Carbide (C/SiC); both are coated in a SiC-based chemical vapor deposit. Each is lightweighted and has an integral mount on the rear surface. The integral mount is used as an interface to the kinematic mount, which is designed to support the mirrors during cryogenic testing while minimizing distortions induced by CTE mismatch among the materials. Additionally, an alternative "simply supported" mount is used to hold the mirrors around the outer edge of the optical surface. This eliminates the bending of the integral mount under the weight of the mirror and evaluates the effectiveness of the kinematic mount. The mirrors were analyzed for optical performance during testing from room temperature to 20K using Finite Element Analysis (FEA) with MSC/NASTRAN 2001. Predicted surface figure error (SFE) based on the removal of bias, tilt, and power was calculated using an in-house Matlab script for spherical mirrors. SFE was verified using the SigFit optical post-processing program to provide Zernike polynomial input for analysis with the Zemax optical software. The results show that the kinematic mount induces minimal figure error on the optical surface.

Paper Details

Date Published: 30 September 2004
PDF: 11 pages
Proc. SPIE 5528, Space Systems Engineering and Optical Alignment Mechanisms, (30 September 2004); doi: 10.1117/12.582766
Show Author Affiliations
Christopher Chrzanowski, Swales Aerospace, Inc. (United States)
Charles Frohlich, Swales Aerospace, Inc. (United States)
Badri Shirgur, Swales Aerospace, Inc. (United States)
Ronald G. Mink, NASA Goddard Space Flight Ctr. (United States)

Published in SPIE Proceedings Vol. 5528:
Space Systems Engineering and Optical Alignment Mechanisms
Lee D. Peterson; Robert C. Guyer, Editor(s)

© SPIE. Terms of Use
Back to Top