Share Email Print
cover

Proceedings Paper

Phase defect printability and mask inspection capability of 65-nm technology node Alt-PSM for ArF lithography (Photomask Japan Best Paper)
Author(s): Shinji Akima; Tooru Komizo; Saburo Kawakita; Yutaka Kodera; Tsuyoshi Narita; Kiichi Ishikawa
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The increase of MEEF(Mask Error Enhancement Factor) as well as the life prolonging of the ArF lithography with low k1 makes the demand for the mask quality more and more severe . Alt-PSM (Alternating Phase-Shifting Mask) is one of the most effective approaches to the resolution improvements of the ArF lithography. In addition, the improvement of MEEF can be expected in Alt-PSM . In this study, firstly Alt-PSM was manufactured containing programmed phase defects. The programmed phase defects are variable type and multiple phase angles. The phase differences of these defects are 180,120 and 60degree. Two types of chrome line width were placed (280nm and 400nm) with four different pitches (1:1.1:1.5,1:2,1:5). Two programmed phase defects type (divot and bump) placed on isolated and on edge. The printability of the phase defect was evaluated by using Aerial Image Measurement System (AIMS-fab193 of Carl Zeiss Co.) In this study, the printable defect was defined to be a defect, which CD error size is within +/-5% and DOF was +/-100nm on wafer. And, the defect detection capability was confirmed by using TeraScan( KLA-Tencor Co.) Finally, the real existence situation of the natural phase defect in imitated 65nm node production mask was estimated by using TeraScan with optimized inspection condition. In addition, the detected phase defect verified the printability. As a result of this verification, it turned out that a practical inspection was possible of Alt-PSM for 65nm technology node.

Paper Details

Date Published: 6 December 2004
PDF: 13 pages
Proc. SPIE 5567, 24th Annual BACUS Symposium on Photomask Technology, (6 December 2004); doi: 10.1117/12.580003
Show Author Affiliations
Shinji Akima, Toppan Printing Co., Ltd. (Japan)
Tooru Komizo, Toppan Printing Co., Ltd. (Japan)
Saburo Kawakita, Toppan Printing Co., Ltd. (Japan)
Yutaka Kodera, Toppan Printing Co., Ltd. (Japan)
Tsuyoshi Narita, Toppan Printing Co., Ltd. (Japan)
Kiichi Ishikawa, Sony Corp. (Japan)


Published in SPIE Proceedings Vol. 5567:
24th Annual BACUS Symposium on Photomask Technology
Wolfgang Staud; J. Tracy Weed, Editor(s)

© SPIE. Terms of Use
Back to Top