Share Email Print
cover

Proceedings Paper

Fabrication and beam characteristics of an ultra-sharp electrode for field emission electron beam
Author(s): Seong-Soo Kim; Jong-Hang Lee; Youn-Chan Yim; Jung-Woo Hyun; Cheol-Woo Park; Seong-Oun Kang
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

In this paper, an ultra-sharp tungsten needle electrode for field emission electron beam using the electro-chemical etching method is fabricated and the current-voltage (I-V) characteristics, emission stability, angular and energy distribution of beam are evaluated. In our setup, NaOH and KOH are used as electrolyte solution in order to fabricate the needle electrode. Throughout the experiments, we observes that the taper length of needle electrode varies from 150 μm to 250 μm according to the applied voltage and the concentration. The electron beam stability is measured to be within 5% for total emission current during 4 hours operation. Meanwhile, the ignition voltage is measured to be low at ~300V. The radius of curvature for needle electrode is experimentally found to be 220Å using a linear fitting of Fowler-Nordheim plot, which is in remarkably good agreement with that of image size obtained from a scanning ion microscope.

Paper Details

Date Published: 25 October 2004
PDF: 10 pages
Proc. SPIE 5604, Optomechatronic Micro/Nano Components, Devices, and Systems, (25 October 2004); doi: 10.1117/12.577601
Show Author Affiliations
Seong-Soo Kim, Kwangwoon Univ. (South Korea)
Jong-Hang Lee, Korea Polytechnic Univ. (South Korea)
Youn-Chan Yim, Kwangwoon Univ. (South Korea)
Jung-Woo Hyun, Kwangwoon Univ. (South Korea)
Cheol-Woo Park, Korea Polytechnic Univ. (South Korea)
Seong-Oun Kang, Kwangwoon Univ. (South Korea)


Published in SPIE Proceedings Vol. 5604:
Optomechatronic Micro/Nano Components, Devices, and Systems
Yoshitada Katagiri, Editor(s)

© SPIE. Terms of Use
Back to Top