Share Email Print
cover

Proceedings Paper

Humidity sensing using plastic optical fibers
Author(s): Chia Meng Tay; Khay Ming Tan; Swee Chuan Tjin; Chi Chiu Chan; Harianto Rahardjo
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

A low cost, low complexity fiber optic humidity sensor is very desirable because of the various advantages fiber optic sensors have over conventional electrical sensors. In this paper a simple, low cost plastic optical fiber (POF) sensor based on cobalt chloride (CoCl2) and gelatin coating on the curved sensing point with a humidity sensing range from 60% to 95%RH is presented. An investigation into the effect of bending radii of the fiber at the sensing point as well as fiber core diameter on sensitivity of the humidity sensor is conducted to find the best way to improve sensing performance. The sensing mechanism of the POF humidity sensor is the attenuation of the evanescent wave at the bent portion of the fiber by absorption due to CoCl2. The sensor has a sensing range from 60%RH to 95%RH. The hysteresis error is negligible and a resolution of 0.01%RH is achieved. The repeatability error can be as low as 1.1% for the whole sensing range. Investigation of the effect of fiber diameter shows that the sensitivity of the sensor improves with larger fiber diameters. The sensitivity of the sensor increases when the sensing portion of the fiber is bent to a small radius.

Paper Details

Date Published: 8 December 2004
PDF: 7 pages
Proc. SPIE 5590, Sensors for Harsh Environments, (8 December 2004); doi: 10.1117/12.571329
Show Author Affiliations
Chia Meng Tay, Nanyang Technological Univ. (Singapore)
Khay Ming Tan, Nanyang Technological Univ. (Singapore)
Swee Chuan Tjin, Nanyang Technological Univ. (Singapore)
Chi Chiu Chan, Nanyang Technological Univ. (Singapore)
Harianto Rahardjo, Nanyang Technological Univ. (Singapore)


Published in SPIE Proceedings Vol. 5590:
Sensors for Harsh Environments
Anbo Wang, Editor(s)

© SPIE. Terms of Use
Back to Top