Share Email Print

Proceedings Paper

Study of interface properties of electrodes for the Alq3 base OLEDs
Author(s): A. Uddin; C. B. Lee; X. Hu
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

We have studied the carrier transport properties of amorphous organic material tris (8-hydroxyquinoline) aluminum (Alq3) for Al, LiF/Al, NaCl/Al, KBr/Al cathodes and ITO and ITO/HTL anodes at room temperature. The investigation was made by the current - voltage, luminescence - current characteristic measurements. The current density increases by several orders for LiF/Al and NaCl/Al cathodes over that of Al at a given bias voltage. The electron injection processes at the metal/organic contact dominate the current - voltage characteristics. The carrier injection seems to be limited by the charge hopping of interfacial molecular sites. We have also developed a process method for the preparation of anodic indium-tin-oxide (ITO) surface for high efficient organic light emitting diodes (OLEDs). X-ray photoelectron spectroscopy (XPS) was used to measure atomic concentration of each element In, Sn, O and C on treated ITO surface. Scanning electron microscopy and atomic force microscopy were used to scan the surface profiles of ITO. The OLED performance considerably improved by the ITO surface treatments as well as by ITO/HTL anode due to the reduction of holes injection barrier between ITO and Alq3 interface.

Paper Details

Date Published: 16 February 2004
PDF: 10 pages
Proc. SPIE 5648, Smart Materials III, (16 February 2004); doi: 10.1117/12.569743
Show Author Affiliations
A. Uddin, Nanyang Technological Univ. (Singapore)
C. B. Lee, Nanyang Technological Univ. (Singapore)
X. Hu, Nanyang Technological Univ. (Singapore)

Published in SPIE Proceedings Vol. 5648:
Smart Materials III
Alan R. Wilson, Editor(s)

© SPIE. Terms of Use
Back to Top