Share Email Print
cover

Proceedings Paper

Evaluation of dry etching and defect repair of EUVL mask absorber layer
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

EUVL mask process of absorber layer, buffer layer dry etching and defect repair were evaluated. TaGeN and Cr were selected for absorber layer and buffer layer, respectively. These absorber layer and buffer layer were coated on 6025 Qz substrate. Two dry etching processes were evaluated for absorber layer etching. One is CF4 plasma process and the other is Cl2 plasma process. Etch bias uniformity, selectivity, cross section profile and resist damage were evaluated for each process. Disadvantage of CF4 plasma process is low resist selectivity and Cl2 plasma process is low Cr selectivity. CF4 plasma process caused small absorber layer damage on isolate line and Cl2 plasma process caused Cr buffer layer damage. To minimize these damages overetch time was evaluated. Buffer layer process was also evaluated. Buffer layer process causes capping layer damage. Therefore, etching time was optimized. FIB-GAE and AFM machining were applied for absorber layer repair test. XeF2 gas was used for FIB-GAE. Good selectivity between absorber layer and buffer layer was obtained using XeF2 gas. However, XeF2 gas causes side etching of TaGeN layer. AFM machining repair technique was demonstrated for TaGeN layer repair.

Paper Details

Date Published: 6 December 2004
PDF: 9 pages
Proc. SPIE 5567, 24th Annual BACUS Symposium on Photomask Technology, (6 December 2004); doi: 10.1117/12.569397
Show Author Affiliations
Tsukasa Abe, Dai Nippon Printing Co., Ltd. (Japan)
Masaharu Nishiguchi, Dai Nippon Printing Co., Ltd. (Japan)
Tsuyoshi Amano, Dai Nippon Printing Co., Ltd. (Japan)
Toshiaki Motonaga, Dai Nippon Printing Co., Ltd. (Japan)
Shiho Sasaki, Dai Nippon Printing Co., Ltd. (Japan)
Hiroshi Mohri, Dai Nippon Printing Co., Ltd. (Japan)
Naoya Hayashi, Dai Nippon Printing Co., Ltd. (Japan)
Yuusuke Tanaka, Association of Super-Advanced Electronics Technologies (Japan)
Iwao Nishiyama, Association of Super-Advanced Electronics Technologies (Japan)


Published in SPIE Proceedings Vol. 5567:
24th Annual BACUS Symposium on Photomask Technology
Wolfgang Staud; J. Tracy Weed, Editor(s)

© SPIE. Terms of Use
Back to Top