Share Email Print

Proceedings Paper

Development of titania nanostructures for the exploration of electron transport in dye-sensitized solar cells
Author(s): Tammy P. Chou; Glen E. Fryxell; Xiaohong Shari Li; Guozhong Cao
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Dye-sensitized solar cells (DSSC) utilizing titania (TiO2) nanomaterials in conjunction with a light-absorbing dye have been extensively explored for the last few decades. Earlier efforts to surpass the 10% overall light conversion efficiency of these devices emphasized the synthesis of dyes with enhanced light-absorbing capabilities, but slow progress in the increase in efficiency has directed attention to the exploration into the modification of the TiO2 nanostructure. Up to this point, the most efficient electrodes in DSSC devices have consisted of 10 micron-thick mesoporous TiO2 film with an interconnected network of 15-20nm particles. This type of structure has shown to impart a large enough surface area for efficient light absorption and charge formation, but the random distribution of nanometer-sized particles is thought to be the limiting factor for enhanced electron transport, hindering further progress in achieving higher efficiencies. Our research utilizes TiO2 nanorods in an attempt to explore and compare the electron transport pathways associated with 1) a random distribution of nanoparticles and 2) a straightforward arrangement of nanorods within the TiO2 nanostructure. It is assumed that a more ordered structure of nanorods would minimize inefficient electron percolation pathways and improve ion diffusion at the TiO2-dye-electrolyte interface by eliminating the randomization of the particle network, by increasing contact points for good electrical connection, and by decreasing small necking points that have shown to develop between adjacently-bound particles in the current TiO2 nanoparticle structure after sintering. The current-voltage (I-V) behavior of three solar cell electrode structures consisting of (1) TiO2 nanoparticle film, (2) TiO2 nanoparticle-nanorod film, and (3) TiO2 nanorod film were compared and analyzed to determine whether the nanorod structure provided a more efficient pathway for effective electron conduction. SEM analysis was also done to examine the structural alignment and morphology of each TiO2 electrode.

Paper Details

Date Published: 14 October 2004
PDF: 9 pages
Proc. SPIE 5510, Nanophotonic Materials, (14 October 2004); doi: 10.1117/12.563083
Show Author Affiliations
Tammy P. Chou, Univ. of Washington (United States)
Glen E. Fryxell, Pacific Northwest National Lab. (United States)
Xiaohong Shari Li, Pacific Northwest National Lab. (United States)
Guozhong Cao, Univ. of Washington (United States)

Published in SPIE Proceedings Vol. 5510:
Nanophotonic Materials
David L. Andrews; Guozhong Z. Cao; Zeno Gaburro, Editor(s)

© SPIE. Terms of Use
Back to Top