Share Email Print
cover

Proceedings Paper

Revealing systems of flaws in high-pressure reactors operating under dynamic pulse loading
Author(s): Gregory Muravin; Curd W. Adams; Boris Muravin; Luidmila Lezvinsky
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Quantitative Acoustic Emission (QAE) technology, physical and mathematical models were created for the reliable and precise identification and evaluation of the danger level (the J-integral value) of a developing main crack in a system of interacting micro- cracks, and the reliable assessment of the remaining lifetime of low density polyethylene (LDPE) reactor tubes that contain cracks. These innovations made it possible to carry out pioneer investigations and established previously unknown dependences, phenomena and criteria, such as: Interdependence between the J-integral value of the flaw and the remaining lifetime of tubes from steel in design condition that contained system of inclusions, micro- cracks or had undergone stress corrosion cracking (SCC) attack and/or hydrogen embrittlement. Criteria for tube rejection. The optimal interval between repeated inspections (monitoring) of the reactor together with the time of analysis and decision. Criteria for acceptable flaw danger level that would allow continued use of tubes in operation for two years. It was established that a main crack in a system of micro-cracks under dynamic pulse loading could start to propagate earlier and faster, and reach greater lengths and take longer time to brake than an individual main crack. At the same time it was shown that the remaining lifetime could decrease significantly when a main crack interacts with a field of micro-cracks. The danger level (the J-integral value) of combined flaw increases significantly and may provoke dramatic failure within a few weeks. Therefore, only continued monitoring can eliminate the risk of tube fracture in this case. Tension tests, optical and electron fractography, micro-sclerometric and AE image recognition investigations, spectral and chemical analysis, TOFD, X-ray, all established a good correlation between the results obtained from steel specimens and full-size tube specimens tests, LDPE reactor tubes examinations and theoretical calculations.

Paper Details

Date Published: 25 May 2004
PDF: 11 pages
Proc. SPIE 5472, Noise and Information in Nanoelectronics, Sensors, and Standards II, (25 May 2004); doi: 10.1117/12.547516
Show Author Affiliations
Gregory Muravin, Margan Physical Diagnostics Ltd. (Israel)
Curd W. Adams, Margan Physical Diagnostics Ltd. (Israel)
Boris Muravin, Margan Physical Diagnostics Ltd. (Israel)
Luidmila Lezvinsky, Margan Physical Diagnostics Ltd. (Israel)


Published in SPIE Proceedings Vol. 5472:
Noise and Information in Nanoelectronics, Sensors, and Standards II
Janusz M. Smulko; Yaroslav Blanter; Mark I. Dykman; Laszlo B. Kish, Editor(s)

© SPIE. Terms of Use
Back to Top