Share Email Print

Proceedings Paper

Guided acoustic emission waves in a thick composite plate
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

In this paper, an efficient and accurate semi-analytical method based on the wavenumber integral representation of the elastodynamic field is described to calculate the surface responses produced by localized dynamic loads in a relatively thick composite plate. Two types of loads are considered: a pencil lead break source located on the surface and a localized shear delamination within the interior of the plate. In the case of the pencil lead break source, the calculated results for the surface motion are compared with those obtained in laboratory experiments on a 4.4 mm thick 32 layered cross-ply graphite/epoxy using high-fidelity broad band transducers. The waveforms consist of both flexural and extensional modes; the amplitude variations of these modes are found to be strongly dependent on their propagation direction. For the delamination source at the mid plane, the results from the exact calculation are compared with those from an approximate laminate theory with shear correction factor and “moment tensor” representation of the source. The results obtained by the two methods are shown to have excellent agreement in the low frequency ranges. Although, the motion due to the delamination is dominated by flexural waves of lower frequency in both thin and thick plates, the presence of extensional waves are observed in thicker laminates. The acoustic emission waveforms from the initiation of a shear delamination source at various interfaces are also calculated. It is found that the amplitude of the flexural modes decreases and that of the extensional modes increases as the source moves farther away from the mid plane.

Paper Details

Date Published: 21 July 2004
PDF: 11 pages
Proc. SPIE 5394, Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems III, (21 July 2004); doi: 10.1117/12.543818
Show Author Affiliations
Ajit K. Mal, Univ. of California/Los Angeles (United States)
Sauvik Banerjee, Univ. of California/Los Angeles (United States)

Published in SPIE Proceedings Vol. 5394:
Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems III
Tribikram Kundu, Editor(s)

© SPIE. Terms of Use
Back to Top