Share Email Print
cover

Proceedings Paper

Study of OPC for AAPSM reticles using various mask fabrication techniques
Author(s): Gregory P. Hughes; Denny Kamaruddin; Kent H. Nakagawa; Susan MacDonald; Bill Wilkinson; Craig West; Keuntaek Park
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

AAPSM masks require OPC correction through pitch in order to print a linear dark line response vs the design CDs. The masks also require correction for the clear intensity imbalance caused by the phased etched Qz wall edge. The clear intensity can be balanced by two approaches;(or a combination of the two) data biasing or wet undercut etching of the Qz etched opening. IC manufacturers would like to use one OPC model that will work for any mask fabrication approach. This paper shows that there is no OPC difference observed in either the aerial image or the printed image of several OPC learning patterns. The study includes CD through pitch for dense (1:1) L/S Patterns and Isolated Line CD vs line-space ratio. The images were analyzed for the dark line linearity, the clear CD balance though pitch, and the clear CD balance with focus (phase error effects -PES).

Paper Details

Date Published: 28 May 2004
PDF: 8 pages
Proc. SPIE 5377, Optical Microlithography XVII, (28 May 2004); doi: 10.1117/12.536138
Show Author Affiliations
Gregory P. Hughes, DuPont Photomasks, Inc. (United States)
Denny Kamaruddin, Motorola (United States)
Kent H. Nakagawa, DuPont Photomask, Inc. (United States)
Susan MacDonald, DuPont Photomask, Inc. (United States)
Bill Wilkinson, Motorola (United States)
Craig West, DuPont Photomasks, Inc. (United States)
Keuntaek Park, DuPont Photomasks, Inc. (United States)


Published in SPIE Proceedings Vol. 5377:
Optical Microlithography XVII
Bruce W. Smith, Editor(s)

© SPIE. Terms of Use
Back to Top