Share Email Print
cover

Proceedings Paper

Nanopatterning on fragile or 3D surfaces with sterol based vapour deposited electron beam resist
Author(s): Ron R. Legario; Prasad S. Kelkar; Jacques Beauvais; Eric Lavallee; Dominique Drouin; Melanie Cloutier; David Turcotte; Pan Yang; Lau Kien Mun; Yousef Awad; Pierre J. Lafrance
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

A novel and effective approach to nano-fabrication lithography is the vapour deposition of the negative tone electron beam resists QSR-5 and QSR-15 (Quantiscript’s sterol based resist) onto a substrate. Vapour deposition is especially conducive for patterning thin delicate membranes (e.g. advanced masks for X-ray lithography - XRL, and Low Energy Electron Proximity Projection Lithography - LEEPL), that are susceptible to breakage during the spin coating process. With the capability for depositing highly uniform thin layers (<50nm) and a demonstrated resolution better than 60nm, QSR-5 and QSR-15 have potential for the fabrication of next generation lithography masks. Optimized for low energy electron exposure where proximity effects become negligible and thus well suited for 1X lithography mask patterning, QSR-5 and QSR-15 have shown exposure doses as low as 100μC/cm2 at 3KeV. In addition to this type of application, the versatility of QSR-5 and QSR-15 have also been demonstrated by the fabrication of a Fresnel zone plate lens on the tip of an optical fibre with the goal of improving the coupling of diode laser emission into the fiber. This application clearly shows the capabilities of this process for producing nano-scale patterns on very small area surfaces that are completely unsuitable for spin-coating of the resist. A second demonstration of the resist's capabilities is the patterning of optical diffractive elements directly on the facet of a semiconductor laser. This opens the way to direct patterning on laser diode facets in order to control the emission profile from the device. It has also proven capabilities in the manufacture of delicate photo masks. In their natural state, QSR-5 and QSR-15 are solids at room temperature and are sterol based heterocyclic compounds, with unsaturated bonding capable of cross linking. On their own merit, QSR-5 and QSR-15 are capable of cross linking under electron beam exposure and are comparable in certain properties to conventional spin-coated resists such as PMMA. When cross linked, their heterocyclic structure gives it excellent selective resistance to solvent based developers (such as alcohols and ketones) for pattern formation. They have also been shown to be highly resistant to etching solutions, even when working with thin high resolution layers on the order of 30 nm. They are highly stable and have a relatively long shelf life, greater than one year. Compared to conventional resists utilizing complex, toxic, and expensive resin systems, QSR-5 and QSR-15 are non-toxic and significantly cost effective. Before evaporation, the resists are in a powder state that allows for direct evaporation and sublimation onto a target substrate that contributes to film uniformity and capabilities for a very thin film; the powder state allows for a wide degree of adjustment in temperature of the vapour chamber, as a means to achieving the desired film thickness and uniformity.

Paper Details

Date Published: 14 May 2004
PDF: 12 pages
Proc. SPIE 5376, Advances in Resist Technology and Processing XXI, (14 May 2004); doi: 10.1117/12.535775
Show Author Affiliations
Ron R. Legario, Quantiscript Inc. (Canada)
Prasad S. Kelkar, Quantiscript Inc. (Canada)
Jacques Beauvais, Quantiscript Inc. (Canada)
Eric Lavallee, Quantiscript Inc. (Canada)
Dominique Drouin, Quantiscript Inc. (Canada)
Melanie Cloutier, Quantiscript Inc. (Canada)
David Turcotte, Quantiscript Inc. (Canada)
Pan Yang, Quantiscript Inc. (Canada)
Lau Kien Mun, Quantiscript Inc. (Canada)
Yousef Awad, Quantiscript Inc. (Canada)
Pierre J. Lafrance, Quantiscript Inc. (Canada)


Published in SPIE Proceedings Vol. 5376:
Advances in Resist Technology and Processing XXI
John L. Sturtevant, Editor(s)

© SPIE. Terms of Use
Back to Top