Share Email Print
cover

Proceedings Paper

Contact hole formation by multiple exposure technique in ultralow-k1 lithography
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The double line and space (L&S) formation method with L&S masks and dipole illumination was found to have high capability to fabricate about 0.3-k1 contact hole (C/H) pattern. The procedure was as follows. The first L&S pattern was formed and was hardened to avoid the dissolution and mixing during the second resist coating. The second L&S pattern perpendicular to the first one was formed on the first resist pattern. The common space area of the two patterns became 1:1 C/H pattern. Simulation results showed that the double L&S formation method has much wider lithography latitude than other methods, such as single exposure of a C/H mask with quadrupole illumination, single exposure of a vortex mask with conventional illumination, and double exposure of L&S masks with dipole illumination to a single layer resist. 75-nm (0.30-k1) 1:1 C/H pattern was fabricated. 80-nm (0.32-k1) 1:1 C/H pattern had 280 nm and 600 nm depth of focus (DOF) in each resist layer. Moreover, a new method, in which a C/H mask replaces the L&S masks, is proposed to achieve cost reduction and the same high performance as the L&S masks.

Paper Details

Date Published: 28 May 2004
PDF: 9 pages
Proc. SPIE 5377, Optical Microlithography XVII, (28 May 2004); doi: 10.1117/12.535114
Show Author Affiliations
Hiroko Nakamura, Toshiba Corp. (Japan)
Yasunobu Onishi, Toshiba Corp. (Japan)
Kazuya Sato, Toshiba Corp. (Japan)
Satoshi Tanaka, Toshiba Corp. (Japan)
Shoji Mimotogi, Toshiba Corp. (Japan)
Koji Hashimoto, Toshiba Corp. (Japan)
Soichi Inoue, Toshiba Corp. (Japan)


Published in SPIE Proceedings Vol. 5377:
Optical Microlithography XVII
Bruce W. Smith, Editor(s)

© SPIE. Terms of Use
Back to Top