Share Email Print
cover

Proceedings Paper

Metrology exposure-induced resist and ARC damage
Author(s): Jackie Yu; Anita Viswanathan; Mokoto Miyagi; Junichi Uchida; Lawrence Lane; Kelly A. Barry; Machi Kajitani; Toshihiko Kikuchi; K. C. Chan; Fred E. Stanke
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

Timbre's Optical Digital Profilometry (ODP) system is a scatterometry-based metrology. In lithography applications, the critical dimension (CD) is often patterned photoresist (PR) on an anti-reflective coating (ARC). When a patterned PR is exposed to the broadband light of the optical metrology tool, a change in reflectance may occur. For "sensitive" film stacks, the changing optical signals then produce changing ODP CD, sidewall angle, and film thickness measurements. This report summarizes the results of several resist and ARC stacks subjected to the repeated broadband light exposure of a Therma-Wave CCD-i reflectometry system. The purpose is to determine which resist-ARC stacks are significantly affected by repeated measurement exposure, and to quantify these effects. Our analysis shows that very little metrology exposure-induced change occurs for ArF resists. For KrF resists, the change is closely related to the type of KrF resist used; acetal-types incur large spectral changes upon repeated exposure, whereas ESCAP (Environmentally Stable Chemically Amplified Photoreist) resists measurements are very stable. Significant reduction of metrology induced spectral and CD change as achieved by incorporating a long-pass filter into the system. The changes due to a single measurement are negligible, however, they can be substantial for a sensitive material when characterizing metrology repeatability. Thus, it is recommended to use stable materials, such as oxide gratings, for metrology characterization.

Paper Details

Date Published: 24 May 2004
PDF: 10 pages
Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); doi: 10.1117/12.534373
Show Author Affiliations
Jackie Yu, Timbre Technologies, Inc. (United States)
Anita Viswanathan, Tokyo Electron America, Inc. (United States)
Mokoto Miyagi, Tokyo Electron America, Inc. (United States)
Junichi Uchida, Timbre Technologies, Inc. (United States)
Lawrence Lane, Timbre Technologies, Inc. (United States)
Kelly A. Barry, Timbre Technologies, Inc. (United States)
Machi Kajitani, Tokyo Electron, Ltd. (Japan)
Toshihiko Kikuchi, Tokyo Electron, Ltd. (Japan)
K. C. Chan, ThermaWave, Inc. (United States)
Fred E. Stanke, ThermaWave, Inc. (United States)


Published in SPIE Proceedings Vol. 5375:
Metrology, Inspection, and Process Control for Microlithography XVIII
Richard M. Silver, Editor(s)

© SPIE. Terms of Use
Back to Top