Share Email Print
cover

Proceedings Paper

Effect of joint configuration on high-power diode laser welding of steel
Author(s): Antti S. Salminen; Anna Fellman; Veli Kujanpaa
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

High power diode laser was the first semiconductor laser used for materials processing. It has found some areas of applications in production. The most promising applications of HPDL in mechanical engineering are in thin steel sheet welding and hardening. The HDPL welding process is at this moment usually performed as conduction limited welding process. In this study the effect of joint configuration and beam properties on the efficiency of welding with HPDL were examined. Joint types tested were bead on plate and butt joint with different joint manufacture. The laser parameters tested were beam intensity, welding speed, incidence angle of laser beam and focal spot size. The tested parameters had an effect on the weld quality and the welding speed. The higher the beam intensity is the higher the welding speed can be achieved. The reliable welding parameters can be established for the welding of various industrial products.

Paper Details

Date Published: 1 June 2004
PDF: 11 pages
Proc. SPIE 5336, High-Power Diode Laser Technology and Applications II, (1 June 2004); doi: 10.1117/12.529077
Show Author Affiliations
Antti S. Salminen, Lappeenranta Univ. of Technology (Finland)
Anna Fellman, Lappeenranta Univ. of Technology (Finland)
Veli Kujanpaa, Lappeenranta Univ. of Technology (Finland)


Published in SPIE Proceedings Vol. 5336:
High-Power Diode Laser Technology and Applications II
Mark S. Zediker, Editor(s)

© SPIE. Terms of Use
Back to Top