Share Email Print
cover

Proceedings Paper

Silicate-based spin-on-glass used as adhesive in micromachining
Author(s): Mihaela Ilie; Vittorio Foglietti; Antonio Minotti; Elena Cianci; Bogdan Marculescu
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

The silicate spin-on-glass (SOG) assisted low temperature bonding of different types of glasses on silicon and silicon compounds substrates is widely used in micromachining of analytical devices. Two silicate spin-on glasses (SOG), potassium silicate KASIL 2130 and sodium silicate N/N CLEAR, both of them from PQ Inc., are used. Previous experiments have revealed the formation of clusters and voids in the cured glass layer, that diminishes the bonding quality. A quantitatively analysis of the bonding process in terms of work of adhesion and interfacial tensions enabled us to identify the hot points of the bonding process: the wettability of the surfaces to be bonded, the appropriate concentration of the soluble glass, the adhesion of the spin-on-glass on these surfaces in both liquid and solid state, the spun-on-glass curing process. To overcome these hot points appropriate technological steps are added to the bonding process: O2 plasma and hot HNO3 exposure of glass/silicon respectively silicon nitride surfaces, one minute delay of spinning after sog-deposition on the substrate, increasing up to 125°C the annealing temperature of the spun-on-glass. Smooth, uniform, reproducible glass layers, are obtained and the dependency of their thickness (ranging from 100 Å to 5000 Å) versus silicate concentration of the soluble glass is determined. In order to explain the clusters and voids formation, successively observations of the cured layer after the annealing treatment and after room temperature storage are performed, and show that room temperature storage of non-completely cured silicate layers leads to the formation of clusters. The effect of the concentration of the soluble silicates is qualitatively analyzed, by means of optical microscopy, showing that silicate solutions having 2-3% of wt. are suitable for bonding applications with best results when the obtained glass layer is thin enough.

Paper Details

Date Published: 30 September 2003
PDF: 8 pages
Proc. SPIE 5227, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies, (30 September 2003); doi: 10.1117/12.520099
Show Author Affiliations
Mihaela Ilie, Institute of Photonics and Nanotechnology (Italy)
Univ. Politehnica of Bucharest (Romania)
Vittorio Foglietti, Institute of Photonics and Nanotechnology (Italy)
Antonio Minotti, Institute of Photonics and Nanotechnology (Italy)
Elena Cianci, Institute of Photonics and Nanotechnology (Italy)
Bogdan Marculescu, Univ. Politehnica of Bucharest (Romania)


Published in SPIE Proceedings Vol. 5227:
Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies

© SPIE. Terms of Use
Back to Top