Share Email Print

Proceedings Paper

Novel pulse-repetitive technological CO2 laser for nanopowders and thin film production
Author(s): M. G. Ivanov; V. V. Osipov; V. V. Platonov; V. V. Lisenkov; Y. A. Kotov
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

The paper reports about a new pulse-repetitive high-efficient technological CO2-laser and its applications. An original method of active medium excitation was used for laser pumping. Efficiency of the laser constructed on the basis of this method reached 12%, average radiation power 600 W, pulse power ~ 10 kW. The laser was used for YSZ powders production by successive evaporation and crystallization in the gas stream. The output rate was 15-20g/h, specific surface of the powder was up to 70m2/g. Evaporation of materials by CO2 laser was also used for ZrO2 and Al2O3 thin films deposition on stainless steel plates. The average thickness of the film was ~500nm, the deposition rate was ~10nm on the area ~1cm2 per pulse. The deposited films have high adhesion properties.

Paper Details

Date Published: 10 November 2003
PDF: 6 pages
Proc. SPIE 5120, XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, (10 November 2003); doi: 10.1117/12.515839
Show Author Affiliations
M. G. Ivanov, Institute of Electrophysics (Russia)
V. V. Osipov, Institute of Electrophysics (Russia)
V. V. Platonov, Institute of Electrophysics (Russia)
V. V. Lisenkov, Institute of Electrophysics (Russia)
Y. A. Kotov, Institute of Electrophysics (Russia)

Published in SPIE Proceedings Vol. 5120:
XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers
Krzysztof M. Abramski; Edward F. Plinski; Wieslaw Wolinski, Editor(s)

© SPIE. Terms of Use
Back to Top