Share Email Print
cover

Proceedings Paper

Early mask making during the 1960s in Dresden
Author(s): Hans Willy Becker
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

One of the first European institutes for microelectronics, the Arbeitsstelle für Molekularelektronik Dresden AME, was founded in 1961 by WERNER HARTMANN. The purpose was to develop processes for fabrication of integrated circuits. Concerning microlithography at first a five-stage mask technique was used since 1965. The artwork original which was called 'Vorlage" was cut with a scale of about 200: 1 .Using a reduction camera the artwork original was reduced about 20 times, to get the reticle known as the "Zwischennegativ". This reticle was then further reduced about 10 times by "step and repeat", using a projection microscope, to get a master mask known as the "Originalschablone" whose scale was then 1 : 1 . By direct photocopying of the master mask one obtained a working mask which was called the "Arbeitsschablone" . Finally, an aligned direct exposure of the working mask on to a wafer created, layer by layer, the micro-pattern of the chip array. Concerning the materials a double layer film was used for the artwork originals, and 2 inch photographic plates were used for the reticles and masks. In this way the first East German bipolar integrated circuits, NOR gates with 8 transistors, were made in Dresden in 1967. This was done with 4 masking levels on 25 mm Si wafers with 1 .5 mmchip size and 20 ?m minimal figure width (critical dimensions). In the late 1960's some improvements were introduced, particularly the 6-barrel semi-automatic photorepeater, which improved the figure width and gave lower tolerances. The largest chip made in 1969 was a J-K master-slave flipflop, this contained 36 transistors on a chip 1 .6 mm x 1 .8 mm and was done with 9 masking levels and with 10 ?m minimal figure width.

Paper Details

Date Published: 28 May 2003
PDF: 10 pages
Proc. SPIE 5148, 19th European Conference on Mask Technology for Integrated Circuits and Microcomponents, (28 May 2003); doi: 10.1117/12.515064
Show Author Affiliations
Hans Willy Becker, Fraunhofer-Institut Photonische Mikrosysteme IPMS (Germany)


Published in SPIE Proceedings Vol. 5148:
19th European Conference on Mask Technology for Integrated Circuits and Microcomponents
Uwe F. W. Behringer, Editor(s)

© SPIE. Terms of Use
Back to Top